Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Devices

DAP-2555 PictureD-Link has launched a new cloud managed, PoE access point using PowerCloud's CloudCommand for management.

After the recent announcement by Atheros of enabling PowerCloud's CloudCommand management in their chipset SDK, we are now seeing OEMs launching products use the cloud-based management technology.

The DAP-2555 is a Dual Band, Power-over-Ethernet 802.11n access point. Management is via PowerCloud's CloudCommand, and provides guest-network capabilities, along with two-factor authentication to the back-end and monitoring and alerts via SMS and e-mail notification.

MSRP for the AP is $399.99 and it's available now. The first year of CloudCommand is included with the router, with each additional year costing $99. D-Link will be launching additional APs based on the PowerCloud system throughout the year. For now you can read about the DAP-2555 on D-Link's website.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi There,Update 2020/08/06386 rc2-3 firmware is in this linkhttps://drive.google.com/drive/folders/154vHdrYh_rGP_qFooHgAkzXSJchge7Ue?usp=sharingChange...
I plan to make available a beta version of the next kamoj add-on - if there is enough interest.N.B: Voxel firmware is a pre-requisite, not an option!I...
I was doing some research and was seeing a lot about issues with the 2.4ghz band not working after a while or having very short range (or poor perform...
No matter what I put for upload/download bandwidth on a new RT-AX88U on Merlin 384.18, it will peg the upload speed at my ISP's maximum speed and ping...
Hi to all!I just installed Pyload and Transmission on my RT-AC86U. Now I have a problem. I have to set the router (192.168.1.1) to go to Internet thro...

Don't Miss These

  • 1
  • 2
  • 3