Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Devices

Security

The mydlink.com landing page before you log in is not secured and you don't see an HTTPS indication until after you log in. I expect that the login is secured, but the way it is now doesn't provide the assurance it should that your connection is secured at login.

After login, I was confused by FireFox 10's address bar security notifications. I haven't liked FF's hiding of the URL protocol information (http://, https://) and with the mydlink site, FF seemed inconsistent in its indication of the browser security status. After checking with Chrome and IE 8, however, I'm pretty comfortable that your connection is secure while you are on the site itself.

But when you are passed to the device's built-in admin server, as happens when you click the Advanced Settings button on any of D-Link's IP camera Settings pages, your connection is no longer secured. This is because neither the cameras nor the DIR-605L router support HTTPS admin.

I initially was able to connect back to the DCS-942L's admin pages by clicking the Advanced Settings button. But when I tried it later on, all I could get was the screen below. The camera was wirelessly connected to my main router instead of the DIR-605L. But that shouldn't matter since the 605L isn't required for mydlink access to the camera.

DCS-942L failed connection

DCS-942L failed connection

Closing Thoughts

I hope D-Link plans to add more cloud features to its DIR-605L. Because the set that it has right now, while showing proof of concept, isn't very impressive. The Event Notification setup should be completely automatic with no futzing with SMTP settings required and many more notifications are needed.

The Visited history feature is a good start, but would be better if it could be filtered to show only attempts at viewing blocked sites and viewed at a summary level of access counts per site. And all the router's cloud features should be documented somewhere, especially describing how a device gets into the "Suspect devices" list.

On the camera side, D-Link also has to step up its game by offering still and video storage in its cloud. They could differentiate themselves from newcomers like Dropcam by offering a small amount of video storage for free and charging if you want more.

Among router manufacturers, D-Link has the "cloud router" field to itself right now. But NETGEAR has already announced its intent to develop app-based routers, which are sure to include cloud features. And while Cisco has been characteristically mum about its app/cloud router plans, I can't believe they would sit out the next step in consumer router evolution.

At least if you want to play with the cloud features that D-Link has right now and monitor its progress as it develops more, it won't cost you a bundle. But if you're happy with the router you have and have something else to do with the $50, I'd let D-Link warm up the water more before jumping in.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Using Asuswrt-Merlin 384.13 on a RT-AC66U-B1 router. "QoS WAN/LAN Bandwidth Monitor" is working very well for internet traffic: I set media streaming ...
HiI just bought a used AC68U, but I can't figure out which HW version it is.On my old AC68U the white sticker on the back says H/W A1, but the new one...
Sorry for this being such a noob question but what Wi-Fi speed should one expect from an RT-AC68U using 5Ghz?I'm lucky enough to have gigabit fibre (L...
hi all,I finally swallowed my pride, ditched my AiMesh setup and reverting back to using multiple APs sharing the same SSID. The dream of having a cen...
I have a 68U at a friend's house and the wireless is weak, so I'm planning to use powerline adapters seen here: https://www.amazon.com/gp/product/B01M...

Don't Miss These

  • 1
  • 2
  • 3