Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Services & Apps

Cisco logoCisco has announced a cloud-based service for monitoring and managing small business networks.

Cisco OnPlus is aimed at reseller partners serving small businesses to deliver managed network services including network discovery and monitoring. Discovery and monitoring is done via a Cisco OnPlus 100 Network Agent appliance installed on the network to be monitored.

Cisco OnPlus 100

OnPlus discovers Cisco [supported device list] and third-party devices on the network that have IP addresses and displays them in topology and inventory views. Customer network information can be viewed via a secure portal using a PC, tablet, or mobile device.

Admins can define alert thresholds, back up and restore configuration device configuration files and apply firmware updates.

The Cisco OnPlus service is available as a bundle including one OnPlus 100 Network Agent and a 3-year subscription to Cisco OnPlus Service. The OnPlus 100 is covered by a limited lifetime hardware warranty.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Been running this RT-AC86U for a little over a month now. 1st thing I did was to load Merlin firmware which seems to be running fine. A short while b...
I'm trying to build NoDogSplash on AsusWrt Merlin 384.14. Compile is fine, configuration also ok. But when I start nodogsplash, it complaining that ip...
I just replaced my Asus 1900P running Merlin with a Netgear r7800 running Voxel 1.0.2.72SF. So far it seems to be running well. Was curious if there a...
Hi Guys I'm totally new here, so forgive my ignorance. I've setup an RT-AC5300 at my in-laws home and put the Sky hub into Modem-Only mode (well, disa...
Hi. Noticed a few people in other posts mentioning that they use a higher end router as a node. I was thinking of doing this but not sure if it would ...

Don't Miss These

  • 1
  • 2
  • 3