Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Other Features

Router Charts

SmallNetBuilder readers can never get enough data and boy, do we have a lot of it! But what we all don't have a lot of is time. We knew our Charts are a well-used feature, but we also knew they needed to do a better job of letting you drill down to the data you need in a faster and easier way. So we've been hard at work redesigning the Charts and hope you like the results.

Router Chart WAN to LAN Throughput

The revamped charts that we're introducing today not only have a new, fresher look, but new features as well. Here's a run-through of what's new:

  • The Product Feature table can now show key features for up to four products in an easier-to-use vertical format. Just check the box to the left of the desired products and click the Compare Checked Products: Product Features link at the top or bottom of the chart.

Router Product Feature Chart

  • The Product Features chart now has a picture of each product and manufacturer website link.

  • The Slideshow icon in the middle column of each chart will link to product slideshows. (Now we just need to get some done!)

  • The Print icon at the top of each chart has been added to make it easy to save the info you want.

You can access the new Router Charts here.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I received a script to run with Merlin where I don't know how to load it. What do I need to do?
Currently i'm running Voxels latest build ( V1.0.2.54SF) which overall seems to work just fine. I know I can set a client device to low,medium,high,hi...
My routers traffic analyzer shows Wistron Infocomm (Zhongshan) Co as a client.Mostly no activity, but some days 3GB download.Any thoughts as to what t...
I enable stateful vs stateless in order to have routable IPV6 addresses.After doing that, and a quick restart of the router, I checked that the target...
Purchased a Blue Cave about a month ago. When I first installed it, I ran some speed tests that were coming in at 160mbps/160mbps - right where it sh...

Don't Miss These

  • 1
  • 2
  • 3