Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Other News

IOGEAR today introduced its 2-Port USB 2.0 Multi-Function Print / Storage Server (GMFPSU22W6).

The device enables network sharing of Multi-Function Printers (MFPs) and storage devices, such as external hard drives, flash drives and memory card readers. Network connection is via a 10/100 Ethernet port and two USB devices can be directly attached to dual USB 2.0 ports. Up to five total USB devices can be supported by attaching an external USB hub.

The GMFPSU22W6 has a suggested list of $169.95 and is available immediately.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have an NFS mount on a router running 380.70 with no issues - NFS is running by default. Further info below (tried to edit/delete this post for chan...
say, what are people using here ?? Default message log levelLog only messages more urgent thanmy log was full of dhcp, and everything else.what would ...
I see a difference here in my bridge 192.168.1.15, which in connected to an access point 192.168.1.11Why the difference in transmission rates?View att...
Hi!I recently bought used RT-N16 with intention to replace firmware with OpenWRT to later get it running in my dorm, which has 802.1x eduroam authenti...
Trying to understand while connected trough a VPN client in Server Address and Port.When Server Address is 84.xx.xxx.xxx and set Port manually to port...

Don't Miss These

  • 1
  • 2
  • 3