Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Other News

The TS-639 Pro Turbo NAS is essentially a six-bay version of its TS-509 Pro. It is powered by an Intel 1.6 GHz CPU and has 1 GB of DDR2 RAM, dual gigabit Ethernet LAN and two eSATA ports for storage expansion.

QNAP TS-639 Pro Turbo NAS

It supports all the 509 Pro's storage modes including RAID 0/ 1/ 5/ 6/ 5+Spare, JBOD, online RAID capacity expansion and online RAID level migration. It also acts as an iSCSI target for SAN use.

Other features include encrypted rsync, full LAMP web serving, media and print servers and NFS, AFP and SMB/CIFS network filesystems.

The TS-639 Pro is available now at an MSRP of $1099.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

One of the reasons I just bought an AC68U was because I wanted the Traffic Analyzer.Apparently enabling this requires "that your information will be c...
Im sure this question has been asked before but I am trying to connect my AC3200 to a Meraki MX64. MX64 supports L2TP with PSK. Asus Merlin doesnt hav...
Hey allSo i have two netgear switch models.I have two nighthawk s8000 and two netgear GS 108's. Both 8 ports. My cable is 1 gigabit and and my system ...
So, I currently have 2 routers. One is a Linksys and the other is an ASUS, I don't think models really make a difference in the scenario. Basically, I...
When I click on "guest Network" I get this screen instead of the normal setup screen. Any ideas? total noob here...thanks

Don't Miss These

  • 1
  • 2
  • 3