Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Other News

The RT2883 is an 802.11n 3 transmitter, 3 receiver (3T3R) system on a chip featuring a high performance CPU and a wealth of connectivity interfaces. The RT2853 is a dual band 2.4GHz/5GHz 3T3R transceiver.

The RT2883/RT2853 implement transmit beamforming technology that can determine a client’s distance and location, and control transmitted power and phase to optimize received power at the client. The chipset is compatible with the newly added beamforming clauses in the IEEE’s latest draft 802.11n standard and also implements a proprietary beamforming technique that can be used with any client.

On the receive side, the RT2883/RT2853 supports Maximal Ratio Combining (MRC), Maximum Likelihood Detection (MLD) and Ralink's proprietary Adaptive Channel Estimation and Equalization (ACE) to ensure robust reception of packets. Also supported is Ralink's "Video Turbine" proprietary QoS for media streaming.

The RT2883 features a 500 MHz MIPS CPU, Hardware Network Address Translation (NAT), hardware frame aggregation and RGMII, USB 2.0 and PCI Express, SPI, I2C and PCM interfaces.

The RT2883/RT2853 3T3R 802.11n Router reference design kit, which includes a full Linux 2.6 Router software stack, will be sampling in Q2 2009. Pricing was not announced.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I want to configure my router so all traffic on my network goes through my VPN (PIA). However, I would like a single machine to be excluded from the V...
I'm am trying to update the firmware on my RT-AC68U. It is currently Merlin build 3.0.0.4.374.39. Initially my goal was to try and return it to the la...
Hello everyone I have a home lab that I dib and dabble in. I have recently taking up an interest in PBX and am about to connect to a Trunk. My PBX is ...
Small business. Main network is handled by ISP. We manage our wireless network. We have 3 AC66U. 1 is running in AP Mesh Router mode, 2 are in node mo...
hi i just bought the ax88u and replaced my ac88u.but i have a problem with the 5ghz wifi band. on my old ac88u i had around 300Mbit speed on my 5ghz b...

Don't Miss These

  • 1
  • 2
  • 3