Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Other Reviews

KeySpan USB Server - Setup & Administration

Once you have everything plugged in, it's time to install the software from the included CD. Just pop it in and follow the on-screen instructions.

KeySpan USB Server Install Screen
Figure 9: KeySpan USB Server Install Screen
(click image to enlarge)

With the software installed, the KeySpan Utility (Figure 10) is used to find the USB Server, and select the USB Devices you would like to connect to - a process essentially the same as for the Silex product.

KeySpan USB Server Utility
Figure 10: KeySpan USB Server Utility
(click image to enlarge)

Under the Admin Tab you will find a menu for configuring the KeySpan USB Server's networking options (Figure 11).

Figure 2:
Figure 11: KeySpan USB Server Admin
(click image to enlarge)

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello everyone,I have posted my problems with a QNAP TS-212P and duplicate files and directories/files being renamed :https://www.snbforums.com/thread...
I have an Asus AC-68U acting as the Primary Router running 384.14. When I enable IPv6 and set it to Native Mode, i can see IPv6 address on my interfac...
Just curious as to why the vertical axis on the 24-hour traffic analyser is not set to display the data better...View attachment 20951
HelloI use an rt-ac68u and a dsl-ac68u with stock firmware as aimesh nodes. Is it possible to use their ethernet ports too? I tried to connect a PC li...
Hi everyone,I have been trying to set things up (as per the attached LL design), but I was wondering if anybody can help maybe and stop me if I'm head...

Don't Miss These

  • 1
  • 2
  • 3