Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Security How To

Setup Step 2

Now we need to load the TightVNC server package onto the PC we wish to control. The package can be downloaded here. Once the download completes, install the application onto your PC. Make sure you allow the installer to install TightVNC as a service so that it can start automatically when the PC boots up. You will also need to set up a password for the server component of TightVNC. The setup tab can be found in the Show current user properties dialog box shown in Figure 10.

Figure 29: TightVNC server tab

Figure 10: TightVNC server tab

The password you set up will be required anytime you wish to connect to your computer and control it from another VNC client (such as the TightVNC custom extension for SSL Explorer). Also be sure to check the allow loopback connections option under the Administration tab (Figure 11).

Figure 30: TightVNC administration tab>

Figure 11: TightVNC administration tab
NOTE: Whereas SSL Explorer uses TCP port 443 for its communication, TightVNC by default will use TCP port 5900. So make sure any firewall software on the PC will allow incoming TCP connections to port 5900.
 

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

So a bit at wits end regarding this -- I've spent more than a few days looking back and forth for a definitive answer on if NAT loopback/reflection/ha...
1. Install WireGuardYou need Entware-aarch64-3.10 to use wireguard without a new firmware build.ㅡ Kernel Module ㅡRT-AC86U - 4.1.27https://drive.google...
Hi, I'm running Merlin 384.19 on rt-ac86u. This morning, I disabled pretty much every native service the rt-ac86u has to offer, I think the media serv...
Hi all,I would like to finally upgrade to ax network and here's my current setup:Optical modem -cat6-> Asus RT-AC88u (dual band AC1000 + 2167Mbps on g...
When I connect my laptop directly to the Spectrum modem I get about 230 mbps. When I connect the modem to the router it is only in the low 90s. All th...

Don't Miss These

  • 1
  • 2
  • 3