Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Security News

NETGEAR logoNETGEAR has bundled 802.11n wireless and SSL tunnels into its new 8 port VPN router.

The FVS318N ProSafe Wireless-N 8-port Gigabit VPN Firewall has a 2.4 GHz 802.11n access point and support for five SSL and 12 IPsec VPN tunnels.Wired ports include one WAN and eight LAN Gigabit Ethernet ports.

NETGEAR FVS318N ProSafe Wireless-N 8-port Gigabit VPN Firewall

NETGEAR specs the FVS318N's routing throughput at 95 Mbps with 6,000 concurrent connections supported.

The FVS318N is shipping now at an MSRP of $179.

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Since I updated 3.0.0.4.382_51612 firmware I have noticed random key generation in syslog presumably this is an attempt to prevent Kr00K as noted in t...
Hello,I have Merlin AC86U as router and AC68U as AiMesh node, does anyone notice that sometimes the AiMesh node: 1 change 0 and then 1 ,,,,,I watched ...
ZenWiFi XT8 new firmware 3.0.0.4.386_25509I was hoping it would solve the disconnection of node after 10 minutes, but it doesn't.I did a hard reset (W...
I have a USB 2TB hard drive formatted with EXT4 connected to Asus AC66U-B1 with Merlin 384.17.I formatted the 2TB hard drive as EXT4 on a Mac - the ro...
I'd like to send logs generated on the router to a remote server, however I'm not seeing any options in the WebGUI to set such server. It's worth noti...

Don't Miss These

  • 1
  • 2
  • 3