Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Security Reviews

Breaking the capture-wait-watch cycle

All too often free network analysis tools require the ongoing analysis to be stopped in order to be able to change what is being looked at. Thankfully this isn't the case with OmniPeek Personal which allows for filters to be created (using a simple make filter command) and applied immediately, on the fly, without the hassle of stopping and starting packet captures: something that really should not be undervalued.

Creating filters is as easy as applying them, without interruption to the ongoing analysis

Creating filters is as easy as applying them, without interruption to the ongoing analysis

Nor should the 'select related' function be undervalued, which can select packets relevant only to a particular node, protocol or conversation with just a single mouse click. Compare and contrast to the multiple steps required to achieve the same type of operation in other analysers, and witness the amount of time saved when finding and fixing problems courtesy of the OmniPeek Personal approach.

Indeed, it is the real-time troubleshooting that impresses most: with OmniPeek Personal claiming the unique feature of being able to offer both expert diagnostics and frame decoding during capture, in real-time. By collecting network traffic into conversations, which are then aggregated by application and rated for user satisfaction, OmniPeek Personal can combine these with accurate response time analysis to give a truly remarkable level of application analysis.

This application view then enables end user satisfaction and network application performance to be linked through Apdex (Application Performance Index) for open standard reporting. Real time statistical support is just as impressive, and along with the historical performance data capture function make it very easy to very quickly determine chatty protocols, talkative nodes or router performance during busy periods for example.

Expert, real time, application diagnosis is not only possible using OmniPeek Personal, but easy as well

Expert, real time, application diagnosis is not only possible using OmniPeek Personal, but easy as well

More Stuff

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Recently tried to login into router and found cert no longer trusted; had to disable security.OCSP.enabled in order to access. What happened? I'm assu...
Bought a Nighthawk X4S R7800 based upon reviews here. Had it now for a couple years, problem is lately I am noticing it dropping connections. Most rec...
My ISP uses pppoe . I use an Assus rt ac 88 u. Do I have to have to use pppoe as my wan connection type or can I just set it to automatic?
Folks, mostly new to the forums here. I've been reading more and more and setting up my recently purchase RT-AX88U with the likes of Skynet/Diverson/A...
Well how do I setup QOS when I am using browser extension SSL VPN on port 7070? Currently it shows untracked so QOS does nothing for my browser as it ...

Don't Miss These

  • 1
  • 2
  • 3