Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools


Access Devices - more

Figures 3 and 4 show ATAs that appear to be the first fruits of its acquisition of Sipura earlier this year - essentially re-brands (with minor repackaging) of the equivalent Sipura products. I didn't get pricing or availability, but you can just check Sipura's site for product details.

Linksys SPA ATAs

Figure 3: Linksys SPA ATAs
(click image to enlarge)

You won't, however, find any info on the WBP54G Wi-Fi Dongle for VoIP seen in Figure 4. Paraphrasing the description I got from the Cisco rep, it's essentially an 802.11g-to-Ethernet adapter / bridge (think WET54G) in a cute little package. It's aimed at applications where you want to put a VoIP adapter, but don't have CAT5 run.

More Linksys VoIP

Figure 4: More Linksys VoIP
(click image to enlarge)

The most interesting find, however, was the SPA9000 Compact IP Key System (Figure 5) that was displayed next to an SPA941. I didn't have a chance to grab anyone to find out more details that night, but when I returned the next day to get a run down of all the products, the SPA9000 had vanished.

The Linksys SPA9000, aka Bigfoot

Figure 5: The Linksys SPA9000, aka Bigfoot
(click image to enlarge)

I asked a few Cisco folks about it, but it seemed like I was asking about Bigfoot. So all I can say is that I have proof that it exists and that it might be the first glimpse of the small business product hardware that Vonage CTO Louis Mamakos alluded to in our discussion at last year's fall VON.

Other vendors showing ATAs included ZyXEL, Clipcomm, ATCOM, and Grandstream. A quick stop at Grandstream didn't turn up any new products announced at this show, but instead the promise of new stuff coming next month. Grandstream's Handy Tone line now includes two non-routing and three NAT routing versions with various combinations of FXS, FXO and PSTN pass-through ports.

Clipcomm was showing its CG series of "VoIP gateways", along with its CP series of IP phones, which I'll touch on in the next section.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi everyone, this is my first post ever here. Hope the answers will be helpful to other users, too …I'm trying to connect two RT-N14UHP routers with t...
HiRT-AC87U, Firmware Version 384.9Router 1, VPNRouter 2, Non VPNThe both routers do have VPN servers setup in them, but mostly Router 2 is used with p...
Hi,Is this possible?I wanna plug second router to first (1lan port) second router (wan port)Set vpn on first router for mac address of second router, ...
Hello all!I was planning to use my RT-AC56U as a serial debug bridge for an Odroid board which is close by. I hooked up a USB cp210x adapter into its ...
I was a little surprised that my router doesn't come with some kind of throughput measurement tool. I figured I could mount a disk on the router and m...

Don't Miss These

  • 1
  • 2
  • 3