Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

The Wireless-Office-in-a-Box consists of three KIRK 2010 DECT handsets and a KIRK KWS 300 Wireless Server . The recently-introduced handset's features include hands-free speakerphone, caller ID, call timer, a 40-name phonebook and headset jack.

The KWS 300 is a SIP-based single-cell wireless phone system that can support up to 12 handsets and four simultaneous calls. It is interoperable with BroadSoft, Cisco, Digium, Innovaphone, Nortel and Objectworld IP PBX systems. A total of six KIRK repeaters can be added to extend the coverage area.

The KIRK Wireless-Office-in-a-Box is available now at an MSRP of $700.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have just upgraded from an AC68U to an AC86U. I setup the 86U with the exact same settings (at least I think they are) as the 68U, however the Wifi ...
I tried to set it up, but I am failing - not for the first time. This time, I have a very basic scenario, one PC is solely a torrent box atm, so I wou...
Previously was using Merlin on my R7000 and I made a post about the WAN MAC Addres showing an old MAC Address from my previous ONT.... Now I am runnin...
I just installed merlin on my AC88U and i see all these settings in fq_codel area but when ever i select anything it doesn't change and am i supposed ...
Hey all,I've been using a 3 router AiMesh (AC66u B1, AC5300, GT5300) setup for awhile. They are all connected via Ethernet. I did a firmware (3.0.0.4....

Don't Miss These

  • 1
  • 2
  • 3