Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

AXIS M50 PTZ Dome Network CameraAxis has announced a palm-sized HD pan/tilt/zoom/IP camera.

The AXIS M50 PTZ Dome Network Cameras are 5.1” wide and 2.2” high, offer 360° surveillance (±180° pan, 90° tilt and 3x digital zoom) with 720p resolution in a package smaller than the average hand (see video).

All models have intelligent motion detection, built-in microphone and can be powered via DC adapter or 802.3af PoE.

The new PTZ dome series includes the AXIS M5013 that features SVGA 800x600 resolution and the AXIS M5014 with 720p resolution. Both can deliver multiple simultaneous, individually configurable H.264 and Motion JPEG video streams and are compatible with AXIS Camera Station video management software.

The M50 Series will be available to order in April at suggested retail prices of $499 for the AXIS M5013 and $599 for the AXIS M5014.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Gday AllSo for some reason my DSL68U lost its portfowarding table. Not sure if it was after the latest update (3.0.0.4.384_21128) (i assume so, but I ...
I'm unclear on the change made regarding DNSSEC validation enabled by default. My LAN is a bit old, and am running two VM DNS servers that do NOT supp...
Version 3.0.0.4.384.327382018/08/1542.54 MBytesAiMesh new features- Supported creating mesh system with new router, BlueCave.- Added Roaming block lis...
I wish to replace a dual NIC and add a couple of quad NIC's to my pfsense custom build. I have done a back up. If I add these will it just ask me to c...
Background: I had a nighthawk r7000 but it was old so I sold it to get something better because it couldn’t handle 1gb fiber and it didn’t like half m...

Don't Miss These

  • 1
  • 2
  • 3