Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools


Physically, the mini is similar in size and shape to a VHS videocassette, so it was pretty easy to find a place for it in my entertainment center. The front panel sports a Buffalo label, a power button and a couple of status LEDs. However, the back panel, shown in Figure 1, is pretty sparse as these types of devices go.

Figure 1: LinkTheater mini Back Panel

Figure 1: LinkTheater mini Back Panel

The panel has a power connector, a 10/100 Ethernet connection and composite A/V connections. It would have been nice to see at least an S-Video output, but Buffalo is evidently trying to keep this unit's price as low as possible. The mini also comes with a fairly large remote control, shown in Figure 2.

Figure 2: LinkTheater mini Remote

Figure 2: LinkTheater mini Remote
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,The 2.4 GHZ wifi is down even if I enable radio under Wireless/Professional.I tried factory resets, different ASUS stock firmware and different Mer...
I've got a question/topic for discussion that is interesting to/bothering me:Why does Entware co-opt the entire "/opt" folder, being that it is just a...
I have an ASUS RT-N66U with Merlin 380.70, the last version for this router. My Rogers package is 150Mbps. My old Dell laptop was getting ~80Mbps. I b...
Called the Philippines to get my router set up as I have a PPOE connection and VLAN 35 to setup VLAN TO WAN SUPPORT for my Bell Canada Home Hub 3000 1...
How can i get IKEV2 IPsec server up and running?I can see only IKEV1 under IPsec advancedThanks

Don't Miss These

  • 1
  • 2
  • 3