Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools


Anyone who uses iTunes on a regular basis knows that message boxes periodically pop up to inform you of available software updates, to let you know that there is a blank disk in one of your optical drives, and so on. When StreamPoint automatically loads iTunes to play a DRM-protected song, the offending message box prevents iTunes from playing media until it is closed. When this occurs, an error message is displayed on the Wireless DJ remote and you're forced to go deal with the message box on your PC before StreamPoint can continue to stream files. This is, at worst, a mild annoyance that does not occur often.

However, the more serious weaknesses of the product will quickly be revealed to anyone with a large digital music library. First, there is no search function on the remote. If you want to locate a certain song using only the remote, get ready to wear out the jog wheel as you try to scroll down the list to find it. The lack of a search function might not bother someone with a couple hundred songs, but many people have thousands. Scrolling slowly through thousands of songs to find one track quickly becomes tedious.

Also, since the menu system on the remote does not work in a loop, attempting to locate a song in the lower half of the alphabet by starting with Z and scrolling backwards is not possible. I have approximately 4500 songs on my PC (about 300 albums). On average, scrolling as fast as I could, it took me a little over a minute to get through all of the songs starting with the letter 'A'. At approximately one minute per letter it would take me over 20 minutes to locate a song that begins with the letter 'Z'. Currently, the only way to narrow your selections down is to search through the genre, album, and artist lists, or stick with your PC defined playlists.

I contacted Logitech to find out if they're planning to fix this problem and they assured me that they are working on a patch that will enable the user to skip to each letter of the alphabet without needing to scroll through all of the songs in the library. The patch will be released before the end of the year, and will make finding songs much easier.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

HI, I use a RT-AC68U with 342.12 firmware: lately I found some devices connected to wifi with the number 2 that seems to indicate that plus devices ar...
Do any TP-Link home wifi routers have support for an IPv6 firewall (meaning the ability to block unsolicited inbound IPv6 traffic, except for stuff th...
I'm trying to figure out the best way to bridge the following routers:TP-Link Archer C2600 - OpenWRT firmware - I want this to be the master/host for ...
Hello All,I am facing a weird issue with mobile devices (mainly android) connecting to internet.below is my network diagramView attachment 18663Issue ...
I am moving from a 1000 sq ft apartment to a 2000 sq ft single floor house and I suspect I will need to use an additional router for Wi-Fi coverage.Cu...

Don't Miss These

  • 1
  • 2
  • 3