Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Features

The ClearSky kit's Bluetooth conference phone (shown in Figure 2) appears to have borrowed its three-legged design from Polycom, a company long associated with high-quality conference room phones.

TrendNet ClearSky Conference Phone

Figure 2: TRENDnet ClearSky Conference Phone

In addition to looking very cool, the phone is designed with an embedded monaural microphone in each of the three legs. Echo cancellation software helps keep the audio from sounding like a speakerphone. In the center of the device, there's a speaker, which I think should be louder at full volume.

Above the keypad, there's a 120 X 80 pixel monochrome STN LCD display. The display is used to set the configuration parameters of the phone and to display phone status. When paired with a computer with an active Skype client, the phone polls the computer and displays the contact list and call history information.

Figure 3 shows the Main screen, which displays the menu (phone operation) mode, Skype status, Bluetooth signal strength, volume level, and battery status.

ClearSky Main Screen

Figure 3: ClearSky Main Screen

I'll admit that I was disappointed by the screen. Today, all but the most inexpensive cell phones have color screens. Though the specification sheet indicated that this was a backlit LCD display, the monochrome screen appeared to be illuminated from the right side of the screen with three light sources. Thus, the right side of the display was somewhat brighter than the left side. The configuration parameters did not include contrast control, but the factory setting seemed adequate.

The icon in the upper left corner shows the menu mode, which, in this case is the “Home” or Main screen. The checkmark icon indicates that the phone has established a Skype connection. The antenna icon shows the relative Bluetooth signal strength from the Bluetooth USB adapter. The number in the upper right corner shows the volume level (range 1-8) that was set. Beneath the volume level is the icon indicating the battery's status. In Figure 3 shown above, the Main screen displays a message that there were 3 missed calls.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I’m using 384.9 on the AC87U and noticed last weekend the parental controls cut the kids internet off an hour early. When I checked the clock was in D...
I currently have a Netgear R7800 running Kong DD-WRT. I have my 2.4Ghz and 5Ghz interfaces using the same SSID, we have mostly new devices and they pr...
Hello,I play games and have been trying to minimize my network's latency to improve this experience. Also, I am hosing a LAN party soon where my netwo...
So here is an odd case. Having looked into every detail and setting of my LAN, i noticed today that my Linksys EA6400 access point reports the connect...
After 5 years troubleshouting with many firmware bugs I sold all my routers.There has never been any hardware issue for me, but as time goes by more a...

Don't Miss These

  • 1
  • 2
  • 3