Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

In Use

The image quality looked good and I appeared to be getting a decent frame rate although there was nothing to tell me what my rate was. But one thing I noticed right off the bat was some "fisheye" distortion in the video. Figure 5 shows a capture from a camera pointing out my front window. This was a bit annoying, but once I zoomed in a bit using the controls on the bottom of the window, the distortion was no longer noticeable.

Video Distortion

Figure 5 : Video Distortion

In the live video mode, the system can be configured to view a single camera, view all cameras simultaneously at a low resolution, or it can rotate through all of your cameras. Figure 6 shows the display of both of my cameras, one looking out the front window, and one out the back.

Dual Camera View

Figure 6 : Dual Camera View

The title on the videos is a configurable item, and the time-stamp can be displayed or not. I found that at least once, the timestamp shown in the video was a couple of hours off from what the base station was configured to.

One thing that would have been nice was the ability to change the color of the overlays. Figure 7 shows an image out my front window after a snow-storm. There's a time-overlay present, but you can't see it because of the snow.

Obscured timestamp

Figure 7 : Obscured timestamp
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi all.I have an RT-AC68U with merlin 384.10-beta2, before I test it with the 384.8 and the same error ocurs, its not a beta bug.I put my company rout...
I am wanting to get a VPN next month (been putting it off for a year now), and been researching which ones are compatible to install on my router:http...
Hi,Since last week I'm able to list the threads I follow, but if I open them it stays loading forever... How can I verify if it's on snb or tapatalk s...
The most convenient way is to use an USB-device as described in Voxel documentation.This is a Lazy Dog for those who want to do it without USB.The sho...
Hello,I live in a 3-story 3,000 sq ft house. I’ve been using Netgear R7000 (freshTomato firmware) located more or less centrally. Coverage has been gr...

Don't Miss These

  • 1
  • 2
  • 3