Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Unpacking: The Base and Handset

The basic m3 package consists of one base, one cordless handset, and one charging stand, as seen in Figure 1. For the purposes of my review, I added an extra cordless handset so that I could have one in my home office and another in my home. Each extra handset includes its own charging stand. The system supports up to eight handsets, although one base can only handle three simultaneous calls.

Basic package

Figure 1: Basic m3 package: base, handset, and charging stand

The base station is an attractive, flat, 7" square-ish device with chrome trim. It has only two connections: an RJ-45 jack for Ethernet, and a socket for the AC adapter. On its front edge, there are four status LEDs indicating power, network connectivity, SIP registration, and call activity.

The bottom of the base has holes for mounting vertically on a wall if desired. Since the base has an internal antenna, mounting it high on a wall could be helpful in increasing the useful range of the system. Given that there are literally no adjustments made on the base, it can be mounted with greater regard for RF performance than ease of access.

The handsets are about the same size and weight as a common cell phone. They sport a 1.75" color LCD display, 2.5mm headset jack, and speakerphone capability. The design is simple, attractive, and elegant.

The handset case is plastic, with the exception of some chrome trim near the earpiece. They appear to be more at home in an office space than on a factory floor. Even so, the phone feels solid, and in a month of heavy use, a handset has bounced off a carpeted floor at least once without breaking. A flat stubby antenna sticks up ¾" from the top of the handset.

The belt clip betrays the care taken in the design of the handset. It clips firmly onto the handset, and stays hooked onto a belt or pocket, even while I was actively mounting heavy servers while on a call.

The headset jack is also a welcome feature. I frequently attend long conference calls, during which I need my hands free. To accommodate this, I prefer to have the handset clipped to my belt and wear a wired headset.

The m3 comes with a small but reasonably complete printed manual. Greater detail can be found at the snom wiki, a link to which is included on the web interface. The wiki includes the provisioning documentation necessary to roll out the m3 in a corporate enterprise environment. The m3 is a brand new product, so some areas of the wiki have not been completed.

Installation and Setup

The initial configuration was startlingly simple and quick. From applying power to making the first phone call was less than five minutes.

On power-up, the phones seek out and automatically establish connections to the base station. If the base is rebooted, the handsets quickly reestablish their connections once the base is back online. This process is fast and completely automatic.

By default, the base station gets an IP address from your local DHCP service. From the handset, you can determine the IP address assigned to the base by pressing volume up once. This brings up a status display on the handset that tells you the system’s MAC address, IP address, and software version. Once you know the IP address of the base, you can access its web-based management portal to go through the system configuration.

The management portal is password protected. The very first thing that you should do when you log in is visit the Advanced Settings page (Figure 2) and change the default login and password to something suitably secure.

Advanced settings
Click to enlarge image

Figure 2: Advanced settings page on the web interface

For those who prefer not to use a computer, it’s possible to make all the initial settings on the handset itself. However, it can be a bit tricky entering SIP account details, passwords, etc. I prefer using the web interface, but it’s good to have another option.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

This thread is for the discussion topic : unbound_manager script. As per the GitHub Hints/Tips: Differences between the operational modes​ E...
I have attached a 2TB WD elements and partitioned it for 1.8TB for network share and 200GB for use with jffs partition on a RTAC88U with Merlin 384.18...
Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).The main cha...
Several times per day my AC-58U refuses to work on the 5GHz band.Looking at the system log I can see the following repeating 50-100 times:Jul 14 12:59...
I have an Asus RT-AC3100 on which the 2.5GHz wifi band died. I also have an old Asus RT-N66U on which the 5GHz wifi band died. So, I decided to disabl...

Don't Miss These

  • 1
  • 2
  • 3