Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Introduction

Actiontec MyWirelessTV Multi-Room Wireless HD Video Kit

At a Glance
Product Actiontec MyWirelessTV Multi-Room Wireless HD Video Kit [MWTV200KIT-01]
Summary 5 GHz Wi-Fi HDMI bridge wirelessly extends your HDTV signal up to 150 feet.
Pros • Simple setup
• Supports up to 1080p
• Supports HDMI passthrough
Cons • Some latency using IR blaster
• On screen menu button didn’t always bring up the configuration screen.

Is your cable or satellite box in your living room, but you’d like to view HDTV in your home office or bedroom? Or maybe your media equipment rack is on one side of your living room, and you want to hang your flat screen TV on the other side of the room without the expense of stringing an unsightly, lengthy HDMI cable. With a list price of $229.99, Actiontec’s MyWirelessTV can solve either or both of these problems.

Product Tour

MyWirelessTV is a fairly simple product. It consists of an 802.11n Wi-Fi 5GHz transmitter and a separate 5GHz receiver shown above. The transmitter, shown in Figure 1, has rear panel connections for HDMI input, HDMI output, power connector and jack for an IR Blaster. This is the device that you place near your HDTV source.

Just connect a cable from your HDMI media source (cable box, Blu-ray player, satellite receiver, etc.) to the HDMI input port. If you are using MyWirelessTV as a wireless HDMI cable replacement, (from your equipment rack to your TV), you don’t need to connect the transmitter HDMI out. If your HDTV source is near your HDTV, you’ll probably want to use the HDMI passthrough cable.

Actiontec MyWirelessTV transmitter rear panel

Figure 1: Actiontec MyWirelessTV transmitter rear panel

The rear of the MyWirelessTV receiver, Figure 2, only has a single HDMI output jack. This is the device that you’d place in another room, such as an office or bedroom, to connect to a remote HDTV. Alternatively, you could place the receiver behind your HDTV across the living room from your equipment rack to eliminate the HDMI cable. I especially like that the IR jack is color coded to match the color of the jack on the corresponding IR blaster cable.

Actiontec MyWirelessTV receiver rear panel

Figure 2: Actiontec MyWirelessTV receiver rear panel

The front panel of the transmitter and receiver, shown in Figure 3 and 4 respectively, are quite similar. There are two differences. The transmitter has the reset button on the front whereas the reset button on the receiver is on the rear. And the transmitter has a front panel mini-USB port while the receiver has a full-sized USB port. The latter is an odd choice, but Actiontec thoughfully includes a mini-USB-USB adapter.

Actiontec MyWirelessTV transmitter front

Figure 3: Actiontec MyWirelessTV transmitter front

The USB ports are used to update the firmware of the devices. In addition, they can be used as a “USB Backchannel”. If you are using MyWirelessTV to extend your HDMI-capable PC to use a remote monitor, you can also connect a USB cable to your transmitter. Then you can plug a keyboard/mouse into the USB port on the receiver. Both front panels have LED indicators for power, wireless connectivity and sync as well as a sync button.

Actiontec MyWirelessTV receiver front

Figure 4: Actiontec MyWirelessTV receiver front

Setup

I’ve reviewed enough products that I’m fairly skeptical about claims of an easy setup process. So it was with the same skepticism that I opened up the box containing My Wireless TV. The product contains almost everything you need including two HDMI cables, IR extender and IR blaster cables to extend the range of your remote if you install the receiver in a remote room.

The only cable not included is a USB cable, should you use the USB backchannel feature described above. A two page illustrated quick start guide is more than adequate if everything works the way it’s supposed to.

Figure 5, taken from the quick start guide, shows the complete configuration for both the transmitter and the receiver. If you need more information, you can download the full user guide from Actiontec.

Quick Start Guide configuration graphic for MWTV

Figure 5: Quick Start Guide configuration graphic for MWTV
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

So, this is a thing that has bugged me for a long time. When I am on the Network Map page, I see the clients connected with 31 connected clients. Then...
I ran into this issue early today and figure to upgrade the firmware to 384.8_2 since it is available (hoping that fixes the issue)...But I still can ...
Hi..This is related to Asus RT-AC88U firmware version 384.8_2 but I always get "Cannot assign requested address" and "Failed to get IP for interface e...
I have one Asus 68u repeater mode in the basement connected wirelessly to a bell parent modem/router on main floor. Only wifi is working on Asus route...
While waiting for Amazon to deliver the new GT-AX11000, I have opened this thread to discuss this new flagship router.I am going to pair it with my ex...

Don't Miss These

  • 1
  • 2
  • 3