Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless How To

Network Recon with Kismet - more

Kismet starts in "autofit" mode, which doesn't list APs in any meaningful order. Press "s" to get to the Sort menu (Figure 17). Here you can specify sort orders, which will organize the APs better.

Sort options in Kismet

Figure 17: Sort options in Kismet
(click image to enlarge)

Press "c" and the access points will be ordered by channel. (Figure 18)

Sorting WAPs by channel

Figure 18: Sorting WAPs by channel
(click image to enlarge)

Kismet will by default hop through channels 1 to 11. Use the cursor keys to move the highlight bar to your SSID and press "L" (note capital "L") and Kismet will lock on the SSID's channel (Figure 19). You will notice that the packet numbers of other APs may still continue to increase. This is because many channels overlap each other in frequency.

Locking the channel scanning in Kismet

Figure 19: Locking the channel scanning in Kismet
(click image to enlarge)

Now that we are reasonably sure that Kismet is working, let's see what happens when the target computer on the network starts transmitting information. In most cases, this will be receiving / sending of email or web surfing. Start the target computer, while keeping the scanning laptop in Kismet.

As the target computer boots into Windows and connects to the target AP, you will notice a surge in regular and encrypted packets being captured by Kismet. You'll be using these packets in the attacks described in Part 2 of this series.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Translite MoCA2.5 with two gigabit ethernet ports. Please see attached specifications sheet.
I'm fiddling with AIMesh to see if it works better than just AP mode and noticed that even though I have it configured to use a wired backhaul, there'...
Anyone interested in MoCA Access?
Hi everyone.So we renovated the house a little while back but at that time the other half couldn't decide fully on layout so the cat 6 cable didn't ge...
Hi!My old wan-start worked fine. After updating to firmware .15 I renamed it to wan-event and adapted it to consider the new parameters. But it doesn'...

Don't Miss These

  • 1
  • 2
  • 3