Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

The WZR2-G300N and WHR-G125 will be available next month at estimated street prices of $99 and $49 respectively.

Buffalo also announced two new "high gain" 802.11g USB 2.0 adapters.

The WLI-U2-SG54HG features a built-in omni-directional antenna and attaches with suction cups to the back of a notebook or desktop PC, while the WLI-U2-G54HG has a directional antenna plus a signal strength indicator. Both devices are powered directly via the USB connection and support Buffalo's AOSS as well as WPA, WPA2 and 128/64-bit WEP.

The WLI-U2-G54HG and WLI-U2-G54HG will both be available next month at an estimated street price of $49 each.

More Wireless

Zyxel logo

Wi-Fi Mesh System Secrets - Here's how to get the most out of your whole home mesh WiFi system.

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

As I understand, a wireless repeater will cut bandwidth in half (loosely speaking). Also, connecting a second AP to a router will not affect bandwidth...
HiI need a new wireless access point that I can connect to my ubnt edgerouter x. I was considering unifi nanoHD but I really don't want to mess with t...
I am in need of a couple of Wi-fi Bridges to link a smartTV and a small home office network located on opposite sides of the ground floor with my wire...
Sorry for the noob question - but I have added a cron job that I would like to survive scheduled reboots. What file to I need to edit (and what should...
i know 802.3af standard is limited to 100m. i would like to install an access point 800' away from my switch. POE extenders are an option, but does an...

Don't Miss These

  • 1
  • 2
  • 3