Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

The WirelessHD ConsortiumWirelessHD today announced the release of its 1.1 specification.

The WirelessHD Consortium today said its WirelessHD 1.1 specification announced this January at the Consumer Electronics Show is now available.

The updated spec increases the link data rate to 10 – 28 Gbps, handles "multi-gigabit" data rates for A/V streaming and file transfer, defines common 3D formats and resolutions and adds support for 4K resolution, WPAN (sync 'n go) and IP data transfer, portable devices and HDCP 2.0 content protection.

The WirelessHD Consortium is comprised of 47 members, including Intel, Panasonic, Samsung, Sony and core technology developer SiBeam.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have an Asus AC-68U acting as the Primary Router running 384.14. When I enable IPv6 and set it to Native Mode, i can see IPv6 address on my interfac...
Hello everyone,I have posted my problems with a QNAP TS-212P and duplicate files and directories/files being renamed :https://www.snbforums.com/thread...
Just curious as to why the vertical axis on the 24-hour traffic analyser is not set to display the data better...View attachment 20951
HelloI use an rt-ac68u and a dsl-ac68u with stock firmware as aimesh nodes. Is it possible to use their ethernet ports too? I tried to connect a PC li...
Hi everyone,I have been trying to set things up (as per the attached LL design), but I was wondering if anybody can help maybe and stop me if I'm head...

Don't Miss These

  • 1
  • 2
  • 3