Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

D-Link DHP-1320D-Link said it has started shipping a combination 802.11n / HomePlug AV router introduced at January's CES.

The DHP-1320 Wireless-N PowerLine Router ($129.99) combines a 2.4 GHz 802.11n access point, router with three-port 10/100 switch and integrated 200 Mbps HomePlug AV networking. The DHP-1320 uses Atheros' Hy-Fi combination wireless and powerline networking technology.

Other features include Wi-Fi Protected Setup, QoS "engine", WEP / WPA / WPA2 wireless encryption and IPv6 support.

D-Link DHP-1320

D-Link also announced availability of three HomePlug AV accessory products. The DHP-346AV PowerLine AV 4-Port Switch ($99.99) combines a HomePlug AV adapter and four-port 10/100 switch and the DHP-307AV PowerLine AV Network Starter Kit ($139.99) is a kit of two HomePlug AV adapters.

The DHP-W306AV PowerLine AV Wireless N Extender ($119.99) is a combination HomePlug AV adapter and 2.4 GHz 802.11n access point. It can be used with any HomePlug AV adapter to connect an Ethernet device to a powerline network. Or its wireless access point can connect via powerline back to the DHP-1320 to form a multi-AP network.

D-Link DHP-W306AV

All these products are available now. All prices quoted are MSRP.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have just upgraded from an AC68U to an AC86U. I setup the 86U with the exact same settings (at least I think they are) as the 68U, however the Wifi ...
I tried to set it up, but I am failing - not for the first time. This time, I have a very basic scenario, one PC is solely a torrent box atm, so I wou...
Previously was using Merlin on my R7000 and I made a post about the WAN MAC Addres showing an old MAC Address from my previous ONT.... Now I am runnin...
I just installed merlin on my AC88U and i see all these settings in fq_codel area but when ever i select anything it doesn't change and am i supposed ...
Hey all,I've been using a 3 router AiMesh (AC66u B1, AC5300, GT5300) setup for awhile. They are all connected via Ethernet. I did a firmware (3.0.0.4....

Don't Miss These

  • 1
  • 2
  • 3