Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

ZyXEL NBG5715 ZyXEL has announced a simultaneous dual-band VPN router with three stream N support on both bands.

The NBG5715 supports up to 450 Mbps link rates (in 40 MHz bandwidth mode) on both bands when used with three-stream capable clients.

The router stands out from the pack of other three-stream N routers by also offering an IPsec endpoint supporting up to five tunnels. It is also one of the few to support three-stream N on both 2.4 and 5 GHz bands.

Other features of the 802.11a/b/g/n router include Gigabit Ethernet ports (one WAN, four switched LAN), upgradeable antennas, two USB 2.0 ports supporting storage and printer sharing and WEP, WPA / WPA2 and WPS wireless security.

The NBG5715 is available now at an MSRP of $250.

ZyXEL NBG5715

 

More Wireless

Zyxel logo

Wi-Fi Mesh System Secrets - Here's how to get the most out of your whole home mesh WiFi system.

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I am trying Aimesh with a AC86U as a router node, and AC68 as a Edge Node, however, I got very bad wifi performance, and only get 30Mbps performanc...
*** WARNING: This is a post aimed to newbies like me! ***​ Hi there,I just managed to successfully install Merlin's firmware (june 2018) to my AC68U ...
I am using AC66U-B1 with stock firmware,I open guest network at 2.4Ghz but I dont't want to expose real MAC to guests.I want to change 2.4gHZ MAC addr...
Two routers provide different LAN address spaces. 1) Gateway address 192.168.0.1 with clients on the 192.168.0.0/24 subnet 2)Gateway address 10.0.0.1 ...
Hiwhat is a chance that quite new repeater as RP-AC87 will get a firmware upgrade enabling create a mesh system? (I already have router RT-AC88U)ThnxL...

Don't Miss These

  • 1
  • 2
  • 3