Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Amped Wireless logo Amped Wireless has announced a wireless router and repeater that both claim 10,000 square feet of coverage.

The R10000 High Power Wireless-N 600mW Smart Router and the SR10000 High Power Wireless-N 600mW Smart Repeater both have dual 600mW transmit amplifiers, high gain 5dBi antennas and low noise receive amplifiers.

The company claims that the amplifiers and higher-gain antennas combine to provide "up to 10,000 sq. ft. of high performance Wi-Fi coverage".

Amped Wireless diagram

The single-band 2.4 GHz R1000's features include one WAN and four switched LAN 10/100 Ethernet ports, dual detachable 5 dBi antennas and SPI+NAT firewall with parental controls. Wireless features include MAC address filtering, four guest networks, Wi-Fi Protected setup and WEP/WPA/WPA2 security.

The SR1000 repeater also operates in the 2.4 GHz band and can be used with any wireless router. It also has dual detachable 5 dBi antennas and four 10/100 Ethernet ports and supports Wi-Fi Protected setup and WEP/WPA/WPA2 security.

The R1000 and SR1000 will be available in the "next few weeks" at MSRPs of $129.99.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello,I have spent a lot of time researching and attempting to connect two routers, where one is connected with a public static IP, and the other by a...
I was running stock firmware for about a year. I wanted to kill my bufferbloat so I installed Merlin, & FreshJR. Things were working fine for a little...
Hi All - first post on this forum. I'm pretty computer savvy but networking always beats me Here's what I want to achieve:I want to have a network wit...
Hey all, I'm in a basement. There is an Xfinity (ISP) hotspot in a building somewhere across the street and since I pay for xfinity service at another...
I am trying to stream games from my PC (Thinkpad P50 Laptop) to my TV (LG UH850v) using Steam in-home streaming.Here's how things are setup at the mom...

Don't Miss These

  • 1
  • 2
  • 3