Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

EnGenius logoEnGenius has announced a dual-band 802.11abgn outdoor AP/bridge

The EnGenius ENH700EXT is a simultaneous dual-band 802.11a/b/g/n AP/bridge enclosed in a weather and UV-resistant, IP68-rated housing.

Dual radios provide network access over large areas on both 2.4 GHz and 5 GHz bands or one radio can be used for backhaul and the other for client connection.

Both radios can operate in access point, non-WDS client bridge and WDS bridging/repeating modes and support link rates up to 300 Mbps.

EnGenius ENH700EXT

EnGenius ENH700EXT

Other features include up to 500 mW transmit power, Gigabit Ethernet port with surge protection, proprietary Power over Ethernet, PPPoE, PPTP, transparent bridging, QoS support and 8 SSIDs per radio, each of which can be mapped to a VLAN.

The AP ships with two 5 dBi omnidirectional antennas for each band that attach via N-type connectors. Also included is EnGenius’ EZ Controller Access Point management software, proprietary PoE injector, AC power adapter and mast/wall mount hardware set.

The ENH700EXT will be available shortly for an MSRP of $549.99 with one year warranty.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Stubby is an application that acts as a local DNS Privacy stub resolver using DNS-over-TLS. Stubby encrypts DNS queries sent from a client machine to ...
HelloI have RT-AC87U Router with latest Merlin firmware and my network have access to address starts from 192.168.10.1 to 192.168.11.254. My IP of rou...
As you already noticed entware-ng (http://pkg.entware.net/binaries/mipsel) doesn't get updated anymore.The repo on github is archived (read-only) and ...
Hi,I have RT-AC86U on latest merlin FW 384.7. At the same time i have 2 x 1Gpbs connection from 2 diff ISPs.I have configured load-balancing ratio of ...
Any ideas on how to get overclocking working on RT-AC68U running 384.7? I am using JFFS scripts to set clkfreq to 1200,666. This is working (verified ...

Don't Miss These

  • 1
  • 2
  • 3