Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

D-Link logoD-Link says you can pre-order its Qualcomm-Atheros based AC1300 router now.

The DGL-5500 Gaming Router AC1300 with StreamBoost Technology is D-Link's first router to use Qualcomm-Atheros' late-to-market VIVE draft 802.11ac chipset. It joins TP-Link's recently-announced Archer C7, which also uses Q-A's technology.

The DGL-5500 supports maximum link rates of 867 Mbps in the 5 GHz band and 450 Mbps in 2.4 GHz, has Gigabit WAN (1) and switched LAN (4) ports and a single USB 2.0 port for printer and storage sharing.

D-Link DGL-5500

D-Link DGL-5500

Pre-orders are being taken now at NewEgg and D-Link's online store for $199.99. Shipments start August 1.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I am having a problem loading Merlin on my RT 86u.the stock version does not allow me to select the merlin software on my PC , it only has the firmwar...
Hello,I've been using asuswrt-merlin firmware for quite some time in my AC87U router. I was running version 384.9 since today when I decided to upgrad...
Hi,Before I had one time where after a power outage config. reset to factory defaults... (just flashed config. and solved it)But this time was differe...
This is a bit of a long and complicated problem, and it is in two parts... so please bear with me.I have the following equipment.A Plusnet one hub (I ...
I would like to be able to tie OPENVPN to a specific SSID or LAN port, e.g I want default traffic go out on the Internet, but specific devices to use ...

Don't Miss These

  • 1
  • 2
  • 3