Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

D-Link logoD-Link has rolled out two 802.11ac access points.

The DAP-1665 Wireless AC1200 Dual Band Access Point is an AC1200 class access point with Gigabit Ethernet port and two upgradeable 2 dBi dual-band omni-directional dipole antennas.

It does not support central management and does not support PoE, so is suited for small deployments.

The AP can be configured as an access point, bridge, bridge with access point, repeater, or wireless client and supports WEP and WPA/WPA2 PSK (only) wireless security as well as Wi-Fi Protected Setup (WPS).

The DAP-1665 carries a one-year warranty and is shipping now, with street pricing "under $100".

D-Link DAP-1665 Wireless AC1200 Dual Band Access Point

D-Link DAP-1665 Wireless AC1200 Dual Band Access Point

The DAP-2695 Wireless AC1750 Simultaneous Dual-Band PoE Access Point is an AC1750 class access point more suited for larger business deployments. It has dual Gigabit Ethernet ports, one of which can power the AP via 802.3at PoE+ and a dedicated RJ45 console port. Its three 4 dBi 2.4 GHz and three 6 dBi 5 GHz external antennas are all upgradeable and the plenum-rated metal chassis can be placed in air passages.

Supported wireless modes are Access Point, Wireless Distribution System (WDS) with Access Point, WDS/Bridge (No AP Broadcasting) and Wireless Client. Other features include WEP and WPA/WPA2 Personal and Enterprise wireless security, built-in RADIUS server, MAC address filtering, wireless LAN segmentation, SSID broadcast disable, rogue AP detection, and wireless radio scheduling.

D-Link DAP-2695 Wireless AC1750 Simultaneous Dual-Band PoE Access Point

D-Link DAP-2695 Wireless AC1750 Simultaneous Dual-Band PoE Access Point

Traffic can be segmented using eight VLANs per radio, client-to-client isolation and Windows Server 2008 Network Access Protection (NAP). Administration can be via HTTP / HTTPS web browser or SSH / Telnet command line. SNMP management is also available via D-Link's AP Manager II, or D-View SNMP management module.

The DAP-2695 carries a limited lifetime warranty and is shipping now, with $280 - $350 street pricing .

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Took my setup Primary 86U and AP 68U with ethernet connection and converted it to AIMesh. Primary motivation was to have more seamless transition for ...
First post so treat me gently please!I have the N66U router running firmware 380.70 with PPPoE. No VPN's or other routers are involved, just the N66U ...
As of 10/1 I cannot use DoT with any provider. Was using 384.13, no change with .14. Can the ISP mess with this because it is new here and I am wonder...
Hello,I am running an Asus RT-AC87U, and recently failed a PCI Assessment Security Scan (Credit Card Merchant) for the following logic:"We have denied...
Hi all, as mentioned in the title above, the issue persists even after turning it off again. I had to do factory reset without AiCloud on to access we...

Don't Miss These

  • 1
  • 2
  • 3