Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

CES logo Marvell announced a 4x4 802.11ac SoC at CES 2015.

The Avastar 88W8964 802.11ac Wave-2 4x4 processor supports 160 MHz bandwidth mode for 2.6 Gbps maximum link rates.

Other features include MU-MIMO, beamforming and 802.11mc precision location support. Marvell's announcement didn't say anything about sampling or production status.

Broadcom logo

Compared to Broadcom's announcement yesterday, Marvell's unveiling seems like weak tea. No companion radios were announced and the near-term usefulness of 160 MHz bandwidth support is questionable given the reported difficulties of implementing the RF parts of a solution.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi.. I wanted to replace the /tmp/mnt/2TBEXTERNAL drive (connected to the first USB port) with another drive. I copied all the files with rsync and ev...
I have an Asus RT-AC68U running Asuswrt-Merlin v384.2.2. I have downloaded version 384.18_0 from Sourceforge but when I attempt the update I get this ...
Hello there folks,I currently have a RT-AC68W running the latest version of Asus Merlin. As part of my network, I also have a RaspberryPi running Pi-H...
I have a a rt ac 88 u set up with express VPNs streaming app to stream US content from down under. I also have a cheap little tp link set up to passth...
HiI'm running a Blue Cave with stock firmware.is there a way of doing a bulk renaming of assets in the client list, or a bulk uploading / configuring ...

Don't Miss These

  • 1
  • 2
  • 3