Amped Wireless Adds AC1750 Touch Screen Router

Photo of author

Tim Higgins

Amped Wireless logo Amped Wireless has announced a new touch-screen router.

The TAP-R3 High Power Touch Screen AC1750 Wi-Fi Router is now its top-of-line touch-screen router supporting maximum link rates of 450 Mbps in 2.4 GHz and 1300 Mbps in 5 GHz when used with clients that support those rates.

The router is spec’d at 800 mW maximum transmit power and has a total of six transmit power and six low-noise receive amplifiers. There is one detachable dual-band antenna and two internal dual-band antennas.

Setup and management of the TAP-R3 is via color touchscreen, guided by setup wizards. There is a full complement of gigabit Ethernet ports (one WAN and four switched LAN) and a single USB 2.0 port supporting storage, but not printer, sharing.

Amped Wireless TAP-R3

Amped Wireless TAP-R3

You can pre-order the TAP-R3 now direct from Amped at its $199.99 list price, for shipment starting 8/19.

Related posts

D-Link Shipping AC Travel Router

D-Link has started shipments of its portable 802.11ac router.

Broadcom adds single-chip 11g router

Broadcom today announced a new single-chip Wi-Fi router combining an 802.11g wireless LAN baseband / MAC, 2.4 GHz radio, 10/100 Ethernet switch and MIPS processor.

Cisco Unveils ‘N 900’ Router

Cisco has officially announced a simultaneous dual-band 802.11abgn router supporting three-stream N on both bands.