Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

NETGEAR logoNETGEAR has announced two 802.11ac access points with built-in central management.

The NETGEAR ProSAFE WAC720 and WAC730 are AC1200 and AC1750 class simultaneous dual-band business access points. Maximum supported link rates for the WAC720 are 300 Mbps in 2.4 GHz and 867 Mbps in 5 GHz. The WAC730 maximum rates are 450 Mbps in 2.4 GHz and 1300 Mbps in 5 GHz.

Both products come with internal dual-band antennas (two for the WAC720; three for the WAC730) and optional external dual-band antennas can be added via RP-SMA ports.

Both APs have a single Gigabit Ethernet port that also powers the device via IEEE 802.3af or 802.3at Power over Ethernet (PoE). The AP can also be optionally powered by a 12 V DC 2.5A power supply (not included). An RJ45 serial console port is also provided.

NETGEAR ProSAFE WAC720 Access Point

NETGEAR ProSAFE WAC720 Access Point

Both APs are fully-featured, supporting WDS bridging and repeating, rogue AP detection, band steering and bandwidth management. Like other NETGEAR business APs, the WAC720 and WAC730 can be managed in standalone mode via web interfaces, or via the new Ensemble Mode Management feature.

Ensemble mode enables centralized configuration and management by the AP of up to 10 same-modelAPs as a single group, without requiring additional hardware, licenses or support fees.

NETGEAR said the new APs will also be able to be managed via NETGEAR's cloud-based Business Central or NETGEAR ProSAFE WC7600 and WC9500 Controllers come Q1 2016 (controller and licenses priced separately).

NETGEAR ProSAFE WAC720 / WAC730 Features

NETGEAR ProSAFE WAC720 / WAC730 Features

The WAC720 and WAC730 will be shipping later in October at MSRPs of $449 and $689, respectively.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

HiI own an RT-AC1200G+. I know this router is not supported and I was looking into porting some features(not the entire asuswrt-merlin FW) over myself...
Hi All,I have the ASUS DSL-86U as my main router. I have a new Sky Q router that I would like to use as a repeater / Extender WiFi at home.Usually I w...
I'm looking for help to use AiProtection's logs/reports. I've tried to ask Asus support's help about two month ago, but there is no answer from them.....
Hi everyone,On firmware RT-AC56U: 384.6Since a couple of month my forwarding table is getting empty. So i filled it again several times and then since...
A vulnerability in MikroTik WiFi routers has affected nearly 2.5 lakh routers across the globe, leaving them vulnerable to crypto-mining and other for...

Don't Miss These

  • 1
  • 2
  • 3