Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Linksys logoLinksys has updated its top-of-line AC1900 class router.

Linksys today announced the WRT1900ACS Dual-Band Gigabit Router. This is the same WRT1900AC V2 outed via firmware release notes back in April. The ACS replaces the AC, which will be gone when the last one is sold.

From the outside, the ACS looks the same as its original sibling. But inside, the ACS has lost the fan, upgraded to a 1.6 GHz dual-core Marvell Armada 38X processor and doubled RAM to 512 MB.

Everything else remains the same including the four-antenna design, USB 3.0 and combination USB 2.0 / eSATA ports.

Linksys WRT1900ACS Dual Band Wi-Fi Router

Linksys WRT1900ACS Dual Band Wi-Fi Router

After much sturm und drang, Linksys has finally sorted through its troubles with the open source community and Marvell and is announcing "full open source support" for OpenWrt's Chaos Calmer release (15.05) as of right now.

The WRT1900ACS can be pre-ordered now from Amazon, NewEgg and the Linksys store, with shipments starting Sunday October 11. MSRP remains the same at $229.99. If you're ok ordering the original WRT1900AC, you can get it for $195 and save $35 at Amazon.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

suddenly cannot connect to ac88u anymore no dhcpi rested the router using all the ways mini cfe,30 30 30, i rested the nvramstill cannot connect unles...
Hello all, like the title says, got a R7800 running the latest voxel firmware and kamoj v3 add on, saw the new v4 released so tried to update but I ca...
Hi guys, I hope you could help me out here with my problem. This morning I saw this error:View attachment 16279 I tried running a repair for both rout...
Anybody else get this problem, while viewing whats connected im seeing network lead connections on devices that conect via wifi
Had lousy wifi all afternoon, LAN was fine. Now, it seems near normal except my tablet won't reconnect. It says "Connected, No Internet" and it doesn'...

Don't Miss These

  • 1
  • 2
  • 3