Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

TP-LINK logoTP-LINK's Archer C3150 was announced at CES 2016.

The Archer C3150 is basically a single 5 GHz radio version of the Archer C5400 that was also announced in January. It supports the same maximum link rates of 2167 Mbps in 5 GHz and 1000 Mbps on in 2.4 GHz. Of course, you need hard-to-find devices that support Broadcom's non-standard "NitroQAM" (1024 QAM) modulation to access those link rates.

The hardware platform includes a 1.4 GHz dual-core main processor, Wi-Fi co-processors in each of the two radios, Gigabit WAN (1) and switched LAN (4) ports and both USB 2.0 and 3.0 ports for storage and printer sharing.

Features include Broadcom's Smart Connect technology intended to automatically assign devices to the best radio, guest network and parental controls with internet access time control.

TP-LINK Archer C3150 Wireless Dual-Band Gigabit Router

TP-LINK Archer C3150 Wireless Dual-Band Gigabit Router

For now, the only way you can get an Archer C3150 is from Amazon for full MSRP of $219.99.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hey guysAnybody else using this yet? Seems stable but on mine it no longer measure upload bandwidth properly. Might not be Merlin, might be the stock ...
Hi - I've been having odd issues with my AC86U mesh setup, and I'm not even sure where to start troubleshooting or searching for how to fix the proble...
My setup is an NVIDIA Shield TV Pro (2019) running a PLEX server with the media stored on a hard drive plugged into my Asus RT-AC68U (Merlin Firmware ...
I've been struggling with my AC66U (old rev.) speed issues, finally I narrowed it down to IPv6. When I enable 6in4, my speed over ipv4 gets capped at ...
Is there a way to show the list of connected devices from the command line on the Orbi running Voxel firmware? While the device list is available on t...

Don't Miss These

  • 1
  • 2
  • 3