Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Security

The 7130 was one of the first to support Wi-Fi Protected Access (WPA) for improved WLAN security. Figure 4 shows the WPA "Enterprise" mode setup, which requires using an external RADIUS server.

Belkin FD7130 - WPA settings

Figure 4: WPA settings
(click on the image for a full-sized view)

The 7130 also supports WPA's "SOHO" mode, which is also known as WPA-PSK (Pre-Shared Key). I didn't show this screen because all it has is an entry box for the 8 to 63 character key and a selector for Encryption method.

The encryption method selector is actually due to Broadcom's choice of providing access to its hardware-based AES (Advanced Encryption Standard) encryption in addition to the TKIP encryption that is mandatory for all WPA implementations. AES is part of the full 802.11i (now known as WPA2) spec, but wasn't included in WPA because its processing requirements would have killed the throughput of "legacy" 11b adapters that don't have hardware AES encryption processors.

The 7130 also supports 64 and 128 bit WEP encryption if your wireless client's WPA driver update isn't yet available. But if you're using any of Belkin's 54g clients, forget about WEP and use WPA - it's easier and more secure.

If you're looking for the "Advanced" wireless settings typically found on other AP's, don't bother. This means that you can't set Authentication Type, Beacon & DTIM Intervals, or RTS & Fragmentation Thresholds, nor can you adjust Transmit Power. These features probably won't be missed by most home networkers, but sophisticated users might wish they were available.

Wrapping up the 7130's security features is its Filtered MAC Address control. You can enter a list of client MAC addresses, which can all be either permitted or denied association with the AP. But the list can't be saved or loaded to / from a file, and you aren't given a pick-list of associated or in-range clients to ease the chore of creating your list.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

AC86U running latest Merlin, and I followed the instructions to install Skynet on it. I have a 32Gig USB key, but I used the UI to format so it's form...
Hi. I added an exception rule to the firewall, to allow BOTH TCP and UDP to port 53, from/to all, because I run a DNS server. I enabled 'log dropped p...
Dear guys I have already done a search on this topic, but I could not find an up-to-date answer to my questions.I have an open ticket with my seller o...
Continuation of. . .https://www.snbforums.com/threads/c...or-r7800-v-1-0-2-75-1sf-v-1-0-2-75-2sf.62906/https://www.snbforums.com/threads/custom-firmwa...
Hello allI find these entries along all my kernel messages. What does it mean?Thanks!May 26 09:52:54 router kernel: net_ratelimit: 18 callbacks suppre...

Don't Miss These

  • 1
  • 2
  • 3