Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Routing Performance

The table above shows that the B-4000's routing performance will be plenty fast to handle most any BSP's connection - which is what I'd expect from the Conexant processor. Note that the lack of UDP streaming and all WAN-LAN results is due to the B-4000's inability to let me open the ports in the Gateway's firewall that Qcheck needs to complete these tests.

Routing Performance Test Results

Test Description Transfer Rate (Mbps) Response Time (msec) UDP stream
Throughput (kbps) Lost data (%)
WAN - LAN (avg)
(max)
LAN - WAN 18.2 1 (avg)
1 (max)
Firmware Version 1.00.06
See details of how we test.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I have been watching my laptop wireless 5Ghz speed change over time. I am just letting my laptop sit and the speed is changing from 5xx to7xx over a m...
Hello everyone,I'm having an issue with USB tethering an android phone as a backup internet device to the AX11000 router. I have all the failover and ...
It just came in my attention that NetGear released it new Wi-Fi 6 Extender: https://www.snbforums.com/threads/netgear-intros-tri-band-wi-fi-6-router-a...
Hi..Is there an iptable or script I can use to block a specific device (IP) from accessing a specific website?
So I am trying to configure my router to have a wired guest network on port 4. Ideally I would like to limit its bandwidth to 50% on the internet.Now ...

Don't Miss These

  • 1
  • 2
  • 3