Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Feature Differences

The 855's feature set is the same as the 4500's with the exception of wireless configuration, which handles two radios instead of one. D-Link doesn't have an emulator up for the 855, but you can use the 4500 emulator to explore everything else in the admin interface.

Figure 5 shows the main Wireless Settings screen, which conveniently contains both 2.4 and 5 GHz radio controls. Like the 4500, the user interface does not indicate the extension channel used in 40 MHz channel mode, which I think it should.

Wireless configuration
Click to enlarge image

Figure 5: Wireless configuration

The 855 continues the 4500's welcome feature of being able to enable/disable wireless on a schedule. This is nice touch to help keep your network secure during off-hours.

I thought it interesting that the 5 GHz radio defaulted to the 20 MHz channel width instead of the faster Auto 20/40, even though it didn't have to. The 2.4 GHz radio properly defaulted to 20 MHz channel width, as all Draft 2.0 802.11n Wi-Fi Certified products should.

Note that channels in the 5 GHz Lower (36, 40, 44, 48) and Upper (149, 153, 157, 161, 165) bands are available, whether or not you choose the Auto Channel Scan Wireless Channel option.

The 802.11 Mode selector provides just about all the options you would need to solve compatibility problems with "legacy" 802.11b/g clients. For 2.4 GHz you get:

  • Mixed 802.11n, 802.11g and 802.11b (default)
  • Mixed 802.11n and 802.11g
  • Mixed 802.11n and 802.11b
  • Mixed 802.11g and 802.11b
  • 802.11n only
  • 802.11g only
  • 802.11b only

and for 5 GHz you get:

  • Mixed 802.11n and 802.11a (default)
  • 802.11n only
  • 802.11a only

The Basic Wireless settings screen also provides access to Wireless Security settings, which include a full suite of WEP, WPA and WPA2 settings, with both "Personal" (PSK) and "Enterprise" (RADIUS) WPA/WPA2 modes. Security can, of course, be set separately for each radio.

I did a quick WPS pushbutton session check with D-Link's DWA-160 Xtreme N Dual Band USB Adapter—D-Link's only dual-band adapter. I carefully reset the router to defaults, which is important to get a good initial security setup (see Wi-Fi Protected Setup (WPS) Need To Know).

I was able to get a Push-button WPS session to successfully complete with a WPA/TKIP secured connection to the 2.4GHz radio, even though both router and client support WPA2 / AES. I tried to get a WPS connection to the 5 GHz radio, but was unsuccessful. This could be due to the fact that both radios are set to the same SSID ("dlink" plus the last four LAN / WLAN MAC address characters).

Figure 6 shows the Advanced Wireless controls, which are no different from the 4500's. The WLAN partition only prevents wireless client-to-client communication. Unfortunately, there is no control to prevent wireless clients from communicating with wired LAN clients, as I found on D-Link's DAP-1522 [reviewed].

Advanced wireless configuration
Click to enlarge image

Figure 6: Advanced wireless configuration

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Recently got a RT-AC86u and installed with the latest Merlin (384.18), and noticed WebUI being unresponsive after a while. Restarting the httpd servic...
I've installed last version of Asus Merlin. I have tried to install pyload but now the default version of python in entware is version 3. Pyload still...
Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).The main cha...
Hi There,Update 2020/07/28Here we have new 386 rc2 beta for public test(so the old links are removed).link:
Is there a way to disable the pop-up when hovering the mouse pointer over threads?

Don't Miss These

  • 1
  • 2
  • 3