Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Introduction

Linksys WGA600N

At a Glance
Product Linksys by Cisco Dual-Band Wireless-N Gaming Adapter (WGA600N)
Summary Dual-band draft 802.11n Ethernet bridge with Ubicom-based automatic QoS
Pros • Dual-band
• Supports Ad Hoc connection for pairing without an AP
Cons • No choose-and-connect from browser interface
• Shorter 5 GHz vs. 2.4 GHz range

My recent review of Cisco's latest Linksys wireless bridge, the WET610N, prompted questions about how it stacks up against its older sibling, the WGA600N. So I'm reviewing it to see!

Like the WET6, the WGA6 is designed to connect one (or with the addition of a switch) multiple Ethernet devices wirelessly to your wireless router.

The WGA6 has one functional edge over the WET6 in its "LAN Party Gaming" mode (Figure 1), which allows direct adapter-to-adapter link-ups without requiring a wireless router or AP. And since each adapter can support multiple clients, a pair of WGAs can be used to create a point-to-point wireless bridge. ("LAN Party Gaming" mode is just an implementation of the Ad Hoc mode that is built into every wireless adapter.)

WGA600N LAN Party mode

Figure 1: WGA600N LAN Party mode

 

Internal Details

Let's first look inside to see how the WGA6 differs from the WET610N. I already did a detailed internal look at both the WGA6 and WET610N. Where the WET6 uses a Metalink WLANPlus chipset with Forward Error Correction technology to allegedly optimize streaming video, the WGA6 uses Atheros wireless married to a Ubicom processor (Figure 2).

WGA600N board
Click to enlarge image

Figure 2: WGA600N board

Specifically, the radio uses an Atheros AR9160 dual-band 3x3 MIMO MAC/Baseband and AR9104 dual-band 2x2 MIMO 802.11n Radio. The CPU is a Ubicom IP5090U, which brings along Ubicom's WISH—a wireless version of its automatic QoS technology. The two internal fixed-position antennas are positioned at the rear and right side (viewed from the front) of the product.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).Aug 9th: Bet...
I want to use it as a modem only to connect to another router. How do I achieve this without a double NAT?My first trick was to simply turn off the wi...
I am using an Asus AC3200 router with V384.13.8 firmware.I have purchased a number of Devolo powerline adapters but am having problems using them.The ...
This is FlexQoS, a fork of the original, groundbreaking FreshJR_QOS script written by @FreshJR.FlexQoS provides a fully customizable Adaptive QoS expe...
WelcomeThis is Diversion - the Router Ad-Blocker for Asuswrt-Merlin All install and update infos are on the Diversion website.May 04 2020Diversion 4....

Don't Miss These

  • 1
  • 2
  • 3