Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Feature Differences

I haven't been updating the firmware of the WNDR3700v1 that I use as my main router. So these observations are based on changes seen between version V1.0.4.55NA firmware on the v1 and V1.0.0.6 firmware on the v2.

The first thing I noticed was the removal of support for WEP security for the main SSIDs when I went to check fallback to 54 Mbps link rates when it was used. Figure 7 shows the central frame of the Wireless Settings page.

WNDR3700v2 No WEP

Figure 7: WNDR3700v2 no WEP

Curiously, WEP does appear as an option in the Guest network settings, along with a new Wireless Isolation option, as shown in Figure 8. The online help hasn't been updated to describe the latter. But Wireless Isolation usually prevents wireless clients from accessing or seeing each other.

WNDR3700v2 Guest network settings

Figure 8: WNDR3700v2 Guest network settings

What hasn't changed much is the ReadyShare USB drive sharing features or performance. The only feature difference I could see is the removal of the scheduled scan setting for the DLNA sever, leaving only the Automatic scan option.

To test performance, I once again connected the Iomega UltraMax Pro dual-drive RAID 0 configured NAS that I use for NAS backup testing and ran the filecopy test from the NAS test suite. With the Iomega drive NTFS formatted, I measured only 3 MB/s writing and 12 MB/s reading. When I reformatted the Iomega as FAT32 and reran the filecopy, performance improved to 12 MB/s writing and 14MB/s reading.

Other changes I found include:

  • Filters for the Logs
  • Addition of Guest Network information to the Router Status page
  • Addition of wireless devices to the Attached Devices page
  • Renaming of Disable SPI Firewall to Disable Port Scan and DoS Protection on the WAN Setup page
  • Addition of a Automatic uplink bandwidth check option to the QoS Setup page
  • Addition of IPv6 support

That last bullet is perhaps the most significant, even if most US ISPs don't yet use IPv6 on their networks. The v2 supports 6 to 4 tunnel, Pass Through, Fixed, DHCP, PPPoE or auto detect WAN types. Figure 9 shows the Fixed type entry screen.

WNDR3700v2 IPv6 settings

Figure 9: WNDR3700v2 IPv6 settings

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Main goal of this release: additional boost of the router performance as I hope (slight boost ). I succeed to change GCC compiler from the version 9....
I have been using AiMesh on over many AiMesh models for the past year and I would like to share some thoughts on AiMesh. Opinions are my own. Discussi...
Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).Aug 9th: Bet...
There was a thread here by another poster. There were some disagreements and that thread was deleted. I found the script by @Martineau on Pastebin, bu...
Hi all, I setup OpenVpn in the router webgui, imported the .ovpn file in the android app.It works if I use the public ip but if I replace it with DDNS...

Don't Miss These

  • 1
  • 2
  • 3