Linksys LAPAC1750PRO AC1750 Pro Dual-Band Access Point Reviewed

Photo of author

Tim Higgins

AC1750 Pro Dual-Band Access Point
At a glance
Product Linksys AC1750 Pro Dual-Band Access Point (LAPAC1750PRO) [Website]
Summary AC1750 class access point with PoE and cluster management features.
Pros • Many features
• Dual Aggregatable Gigabit Ethernet ports
• Central management without dedicating an AP
Cons • Meh range
• Proprietary WDS
• No CLI

Overview

Updated 10/13/14: Miscellaneous corrections from Linksys

Linksys has been building up its small business product line over the past year or so. We’ve looked at its LGS552P Managed PoE+ switch and its LRT214 and LRT224 VPN Routers. Although Linksys has also been shipping an assortment of N and AC access points for awhile, we’re jumping right to the top of the line with this look at its LAPAC1750PRO.

The LAPAC1750PRO is an business-grade access point with a broad feature set. It is primarily managed through a browser interface via HTTPS / HTTP, but can also be managed via SNMP. CLI (command line interface) jockeys, however, will be disappointed that there is no telnet or SSH option. Instead, there is a Cluster Management System that provides a single management interface to control an unspecified number of APs.

The LAPAC1750PRO is meant to be installed on a wall or ceiling and includes a mounting bracket and also a backer plate to use when mounting on ceiling tiles. Even though the AP would normally be powered via 802.3at PoE, Linksys thoughtfully also includes a 12VDC power wart.

The callout diagram below decodes the states and colors of the single tri-colored indicator. Note in the back panel description that the dual Gigabit Ethernet ports can be aggregated for higher bandwidth. I was unable to find controls to set up aggregation, so checked with Linksys. They said the two ports come configured for static LAG (not 802.3ad LACP). Note this means the ports aren’t switched, so the second port can’t be used to connect to other devices or APs.

Linksys LAPAC1750PRO front and rear panel callouts

Linksys LAPAC1750PRO front and rear panel callouts

Inside

Updated 10/13/14: Component corrections

Linksys requested short-term confidentiality for the inside photos, so I had to open up the review sample after testing. The inside of the AP is very tidy, with generous use of RF shields. I noticed during testing that higher throughput was produced with the front of the AP aimed at the chamber antennas. Now that I see the antenna placement, mystery is solved.

Linksys LAPAC1750PRO inside

Linksys LAPAC1750PRO inside

I had to carefully pry everything off to get a look at what makes the AP tick. Turns out it’s a fairly standard Broadcom-based design, with the main twist being the Broadcom BCM53016A dual core Cortex-A9 CPU @ 1 GHz serving as the main CPU. The BCM4331 BCM43431 2.4 GHz and BCM4360 BCM43460 5 GHz radios are outside the RF cans that house their associated power amplifiers. The thermal tape hiding the radios provides some heat sinking via the RF can tops. (The BCM43431 and BCM43460 are enterprise-grade equivalents of the BCM4331 and BCM4360 found in Broadcom-based AC1750 consumer routers.)

Linksys LAPAC1750PRO board

Linksys LAPAC1750PRO board

The key components are summarized in Table 1 along with the first AC1750 AP we got our hands on over a year ago, Ubiquiti’s UAP-AC.

Linksys LAPAC1750PRO Ubiquiti UAP-AC
CPU Broadcom BCM53016A dual core Cortex-A9 CPU @ 1 GHz Broadcom BCM4706
Switch N/A Broadcom BCM53125
RAM 256 MB Samsung K4B2G1646E 256 MB Hynix H5PS1G63JFR (x2)
Flash 128 MB Macronix MX30LF1G08AA 16 MB Winbond 25Q128FVFG
2.4 GHz Radio – Broadcom BCM43431
Microsemi MSC5518 2.4 GHz power amp (x3)
BCM4331KMLG
SiGe 2605L (x3) 2.4 GHz Hi Power WLAN power amp
5 GHz radio Broadcom BCM43460
Skyworks SE5003L1 5 GHz, 23dBm Power Amp w/ Power Detector (x3)
Broadcom BCM4360
Skyworks SE5003L 5 GHz, 23dBm Power Amp w/ Power Detector (x3)
Table 1: Access Point component summary and comparison

Setup

The AP comes with a static IP address of 192.168.1.252, but also set to pull an IP address via DHCP if it finds a server. Logging in with the default admin / admin lands you at the System Status page shown below. As you might expect from a "pro" level product, there aren’t any wizards to get in your way of bit twiddling. Just jump right on over to the Configuration tab and go at it.

System Summary

System Summary

I found documentation a bit wanting, although an attaboy is deserved for decent online help. The basics seem to be covered in the User Guide. But you’ll probably want to also check the FAQ tab on the product support page as well as this FAQ page. The latter page was where I learned the LAPAC1750PRO’s WDS implementation is proprietary and doesn’t even work with Linksys’ other APs like the LAPAC1750.

Features

The LAPAC1750PRO has a lot of features. Here’s a rundown of the key ones:

  • Multiple SSIDs: 16 (8 per radio)
  • VLAN Support: Yes
  • Number of VLANs: 17
  • SSID to VLAN Mapping: Yes
  • Captive Portal: Yes
  • Workgroup Bridge: Yes
  • WDS Bridge: Yes (NOTE: Proprietary implementation)
  • IPv6: Yes
  • Access Control per SSID: IPv4, IPv6, and MAC-based
  • DiffServ for QoS: Yes
  • WEP, WPA, WPA2, 802.1X with RADIUS: Yes
  • Rogue AP Detection: Yes
  • 802.1X Supplicant: Yes
  • Channel Isolation: Yes
  • WMM: Yes
  • Single/Central Management System: With Cluster
  • Bandwidth Utilization: Yes
  • Scheduler: Yes
  • Band Steering: Yes
  • Beamforming: Yes
  • Dual Firmware Image Support: Yes
  • Management Access Control: MAC and IP-based
  • Management Interface: Web (HTTP / HTTPS), SNMP
  • Event Notification : Local Log, Remote Syslog, and Email Alerts
  • Network Diagnostics: Log, Ping, and Packet Capture
  • Wi-Fi Certified: Yes

Note that WiFi Protected Setup (WPS) is not supported, which is par for a business-grade access point.

Despite the list above, I couldn’t find features like automatic AP power adjustment, fast roaming and client load shedding / distribution, so checked with Linksys. They said that they currently support 802.11i pre-authentication for roaming with clustered LAPAC1750PROs, but that client devices must also support 802.11i.

Linksys also said automatic power adjustment of clustered APs and client load shedding are "in the product roadmap", but with no definite implementation timeframe. Centralized firmware upgrade of clustered APs is also in the roadmap.

Automatic channel management for clusters is already implemented. The screenshot below shows that channel reassignment frequency and interference levels can be set. You can also lock channel assignments for specific radios. Linksys said they determine best channel use by monitoring actual channel utilization.

Channel Management

Channel Management

Here is a bit more on Channel Management from the User Guide.

At a specified interval, the Channel Manager maps APs to channel use and measures interference levels in the cluster. If significant channel interference is detected, the Channel Manager automatically re-assigns some or all of the APs to new channels per an efficiency algorithm (or automated channel plan). If the Channel Manager determines that a change is necessary, that information is sent to all members of the cluster and a syslog message is generated indicating the sender AP, new and old channel assignments.

The Wireless Neighborhood feature is an attempt to help visualize wireless coverage. But the data presentation takes some getting used to and is nowhere near as intuitive as the signal strength overlay on maps display found in wireless survey tools like Fluke’s AirMagnet.

Wireless Neighborhood

Wireless Neighborhood

I had only one AP review sample, although Linksys would have been happy to send more. So I didn’t explore any of the cluster features.

A feature that could prompt an AP purchase on its merits alone is Captive Portal. This is one place where a wizard might have been handy. Fortunately, the Captive Portal admin pages are arranged pretty much in priority order and you can just step through them. You can create multiple Portals and associate them with multiple Virtual APs (VAP).

Since each VAP has its own security configuration, can be assigned to a VLAN, have scheduled availability, up and downlink bandwidth limits and even be band-steered to 5 GHz, you can see how powerful Captive Portals can be.

Captive Portal Instance Configuration

Captive Portal Instance Configuration

Of course you can customize the portal page. Here’s a screenshot of the default that is built in, captured from the built-in preview feature.

Captive Portal Default Capture Page

Captive Portal Default Capture Page

The gallery has more screenshots of admin screens with commentary. Again, there are a lot of features. So if you are seriously considering a purchase, you should download the User Guide and give it a thorough read.

Summary

The System Summary page is presented upon login.

Network I/F - LAN

First half of the Network Interfaces page shows LAN info.

Network I/F - WLAN

Second half of the Network Interfaces page shows WLAN info.

Radio Stats

Lots of info here if you know what to look for.

Interface Status

An overview of real and virtual interface status.

Interface Statistics

Check your bit and byte counts for each interface here

System Log

Not much to see in the System Log.

Wireless Radio 1

Top half of wireless radio settings page.

Wireless Radio 2

Bottom half of wireless radio settings page. Transmit power is adjustable downward in 25% clicks. TSPEC is a traffic specification sent from a QoS-capable wireless client to an AP requesting a certain amount of network access for the traffic stream (TS) it represents.

Rogue AP

Scans for in-range APs can be enabled for each radio. When enabled, a 10 ms scan is done every 60 seconds. You can move APs from the Rogue to Trusted list and import and export trusted APs.

Virtual AP

Eight VAPs per radio provide lots of flexibility.

Scheduler

Multiple schedules can be created and assigned to Radios and / or VAPs.

QoS-ACL

Up and down bandwidth limits and access control lists and rules can be created and assigned to each VAP on each radio.

Client QoS

QoS and ACL status of each client can be checked.

Wireless Performance

The LAPAC1750PRO was tested using the V8 Wireless test process. All wireless testing was done using 1.0.4 build 03 firmware. The access point was first reset to factory defaults and Channel 6 and 20 MHz bandwidth mode was set for 2.4 GHz and Channel 153 and 80 MHz bandwidth mode for 5 GHz. The AP was laid flat and centered on the turntable for testing with the 0° position having the the connectors facing away from the chamber antennas. All testing was done via WPA2/AES secured connections.

The Benchmark Summary below shows the average of throughput measurements made in all test locations. The results don’t mean too much by themselves, so we’ll bring in some AC1750 routers for comparison. There are no other AC1750 APs tested with the V8 process to compare.

Benchmark Summary

Benchmark Summary

In this comparison, the AP’s 2.4 GHz downlink performance is lower than all AC1750 routers, but is third from the bottom for uplink. Average 5 GHz downlink is better only than the TP-LINK Archer C7 V2 and 5 GHz average uplink beats only the NETGEAR R6300v2.

AC1750 Router Average Throughput

AC1750 Router Average Throughput

As noted earlier, there are no other AC1750 access points tested with the V8 process to compare. So instead, I chose two V8-tested AC1750 routers, ASUS’ RT-AC66U and Linksys’ EA6500. The AP and router are in separate charts, so the throughput vs. attenuation profile plots are presented side by side. Keep an eye on the vertical scale when comparing plots; it’s not always the same.

In general, you’ll see the LAPAC1750PRO plots disconnect earlier than the compared routers. I suspect this is a byproduct of the short distance between AP and test chamber antennas, AP rotation during test and internal AP antenna placement. So I think it’s fair, for all products, to follow the slope of the plot and draw an imaginary line down to the x axis to get a better comparison of relative range.

That said, the AP has a lower maximum throughput and begins its downward slope almost immediately. So it’s clear that its 2.4 GHz downlink throughput profile is lower than the other products’.

2.4 GHz Downlink Throughput vs. Attenuation

2.4 GHz Downlink Throughput vs. Attenuation

The AP does a bit better on 2.4 GHz uplink with throughput staying at maximum out to 6 dB. But the overall trend is still lower than the ASUS and Linksys routers’.

2.4 GHz Uplink Throughput vs. Attenuation

2.4 GHz Uplink Throughput vs. Attenuation

The LAPAC1750PRO doesn’t do much better on 5 GHz downlink. Maximum throughput is about 50 Mbps lower than the two routers’ and the line slope indicates it disconnects at 30 dB of attenuation vs. 33 and 36 for the two routers.

5 GHz Downlink Throughput vs. Attenuation

5 GHz Downlink Throughput vs. Attenuation

5 GHz uplink is the best of the four benchmarks with maximum throughput of 391 Mbps just about the same as the two routers’ maximums. But the AP’s slope is steeper, once again indicating inferior range.

5 GHz Uplink Throughput vs. Attenuation

5 GHz Uplink Throughput vs. Attenuation

Closing Thoughts

Access points in general aren’t designed with the same "one-device-does-it-all" focus that consumer routers have. After all, wireless pros learned long ago that you can’t use a single AP for many reasons if you want reliable service with decent throughput. So APs focus on features that are needed in multi-unit installations, such as centralized management, multiple SSIDs linked to VLANs, client limits, bandwidth limits and more.

So it’s no surprise that Linksys’ LAPAC1750PRO doesn’t outshine top consumer routers in wireless performance. The first AC AP we tested—Ubiquiti’s UAP-AC—didn’t either and it’s still more expensive than the Linksys, while more than a year older in design.

But what it may lack in performance, the LAPAC1750PRO more than makes up in features. The Virtual AP feature with its associated bandwidth and authentication controls and the Captive Portal feature are particularly powerful, providing much more control of who is doing what on your WLAN than you’ll get from any consumer router.

If all this sounds good, then you might want to bring an LAPAC1750PRO in and see if it can do the job for you.

Related posts

SMC2532W-B 802.11b High Power Wireless PC Card reviewed

Will higher power really solve your wireless networking problems? We set out to answer that question in our review of the SMC2532W-B 2.4GHz 802.11b High Power Wireless PC Card. Read the review and see what we found.

New To The Charts: TP-LINK TL-WR1043ND Ultimate Wireless N Gigabit Router

The TP-LINK TL-WR1043ND Ultimate Wireless N Gigabit Router has been tested and added to the Router Charts.

Cisco Linksys E4200 Maximum Performance Wireless-N Router Reviewed

Cisco's latest top-of-line wireless router shoves aside the E3000 to take its place atop the Linksys wireless router lineup.