Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools


ZyXEL logoZyXEL says it has started to ship a cloud-enabled wireless access point.

The NWA1100N-CE can be controlled both locally via a web-based interface or remotely via PowerCloud Systems' CloudCommand web service.

CloudCommand creates a single virtual wireless network across multiple different locations. Administrators can manage and upgrade APs and receive real-time alerts via emails and cell phones for all devices no matter where they are physically located.


The NWA1100N-CE supports single band 2.4 GHz 802.11n at link speeds up to 300 Mbps. Features include PoE, multiple SSIDs and AP, bridge, repeater and wireless client modes.

ZyXEL is offering a free one-month trial of the cloud-management service with NWA1100N-CE purchase. There is also an exclusive promotion with PC Connection that gets you a free NWA1100N-CE with the purchase of three years of cloud-management service for $299.

Visit ZyXEL for more info.

More Stuff

Featured Sponsors

Top Ranked Routers




Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Win This!


You could win a ZyXEL NAS326 2-Bay Personal Cloud Storage

Learn How!

Over In The Forums

SO i have noticed in Admin>systemtime zone = -05:00 US/Candana* Reminder: The System time zone is different from your locale setting.And System logSys...
So I sit and read about the Netgear X10 802.11ad router that seems to just been announced... Now normally I would not go for the last and greatest, an...
I have an RT-87R running Merlin 380.62_1 and I cant get cut through to go to level 2 CTF+FA only to level 1 CTF. I have QOS turned off, IP Mapping is ...
I am not sure whats going on but i am using 380.62_1 on Asus RT-AC68u and have upload set traditional Qos to 7 Mbps and download set to 70 Mbps. Whic...
Hi,after a reboot /mnt/opt was properly mounted but there was no ln -s /mnt/opt/entware to /tmp/opt and optware services logically failed to start. Wh...

Don't Miss These

  • 1
  • 2
  • 3