Router Charts

Router Charts

Router Ranker

Router Ranker

Router Chooser

Router Chooser

NAS Charts

NAS Charts

NAS Ranker

NAS Ranker

More Tools

More Tools

Wireless How To

Introduction

aircrack first failed run

Our original WEP-cracking series appeared over two years ago and is still among the most popular articles on SmallNetBuilder. But to anyone trying to use the articles, it quickly becomes apparent that they were out of date and in desperate need of updating. That said, the originals still contain a lot of very relevant information so we suggest you read at least Part 1 before you start, as it contains some helpful background information.

Before we get started, however, let us make a few points that may save some readers the time and effort of trying these techniques:

  • To successfully follow this How To, you need basic familiarity with networking terminology and principles. You should be comfortable with using command line-based programs and basic familiarity with Linux will be helpful too.

  • These procedures assume that the target WLAN has at least one client associated with an AP or wireless router. They will not work with an AP that has no associated clients.

  • Accessing anyone else's network other than your own without the network owner's consent is at worst illegal in some U.S. jurisdictions and at best, not a neighborly thing to do.

    SmallNetBuilder, Pudai, LLC and the authors do not condone or approve of illegal use of this tutorial in any way.

With that out of the way, let’s proceed. What do you need to crack a WEP-protected wireless network these days? The good news is you probably already have everything you need to do it, since, in the two years since the original article, there have been many advances in the open source and wireless exploit tool world.

Gone are the days of requiring expensive, hard-to-find hardware (like the two PRISM 2 Wi-Fi cards and two computers in the original tutorial). Many more of the popular chipsets are now supported. Also you can do it all on a single machine!

The best WEP cracking toolset has been developed by the Aircrack-ng team, so that's what we're going to use. Aircrack-ng is a collection of programs aimed at WEP and WPA-PSK key cracking. While are are seven programs (plus a few Tools) in the suite, we'll be using four of them:

  • airmon-ng - for switching the wireless adapter into monitor mode
  • airodump-ng - for WLAN discovery and packet capture
  • aireplay-ng - for traffic generation
  • aircrack-ng - for recovering the WEP key

Although there are versions of the suite that run on Windows and even Zaurus (!) OSes, we're going to use the Linux version. Don't worry about not being a Linux expert, however, since we'll be using the BackTrack 2 (BT2) live CD, which will leave your Windows machine's hard drive unchanged. BT2 comes with the entire aircrack-ng suite already installed.

More Wireless

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Top Performing Routers

AC3200
AC2600
AC1900
AC1750
AC1200

Top Performing NASes

NoRAID
RAID1
RAID5

Over In The Forums

I have an ac68u running Merlin Is it possible to setup either the PPTP or OpenVPN server in such a way that would allow it to be use as a proxy, but ...
Hello all, I just completed this configuration and it seems to work fine; however, I would like to make sure: The main router is an EnGenius ESR9850...
Hi all, new here and thinking it's time to upgrade my wireless network. I run a pfsense router and a TP-Link TL-WA801ND as my main AP. It's a good li...
I just bought a new ASUS RT-N66U. I chose this device because of its ability to track per-device traffic with the Merlin firmware. Before using cust...
Hi, i have an Asus RT-AC87U with Merlins Firmware:380.59 I have an openVPN client running to connect to a german server to stream german media and new...

Don't Miss These

  • 1
  • 2
  • 3