Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts

Step 1 - Enable Wake on LAN

Most motherboards today have a built in NIC and support Wake on LAN functionality. You'll have to go into the BIOS Power Options to enable it. The process is different in each motherboard, but pretty straightforward.

On an Intel CPU ASUS P4C800 board, the option is called Power On By PCI Devices in the APM (Advanced Power Management) menu. On an AMD CPU MSI K8N board, the option is called Resume by MAC LAN.

Figure 2 below is screenshot from a laptop BIOS. You can see the option is called Power Management and there is a selection for Wake on LAN.

BIOS view

Figure 2: A view of a laptop BIOS

If you're using a separate PCI LAN card, you'll have to enable WOL functionality for PCI devices in your BIOS. Note that if you're using an older motherboard with a PCI 2.1 or older bus, you'll likely need to connect a 3-pin WOL cable from the NIC to the motherboard. This cable is typically not needed in newer computers using a PCI 2.2 or newer bus.

Finally, check the Advanced Properties of your network card. In Windows, go to Start-Settings-Network Connections to ensure Wake functionality is enabled. An example is shown below in Figure 3.

NIC Properties

Figure 3: The Advanced Properties tab of the NIC properties

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2