Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Basics

Introduction

How To Fix Your Wireless Network

Wireless networks are a wonderful thing. However, the freedom and convenience they provide can also come with a healthy dose of frustration and annoyance. Your pain might come in the form of frequent network disconnects, sluggish speed, inability to connect or, if you're really lucky, combinations of all three.

Fortunately, armed with a basic understanding of how wireless networks (also commonly known as wireless LANs or WLANs) work and some simple troubleshooting techniques, you can find, fix or at least minimize many WLAN problems.

In this first article of a series, I'll first provide an explanation of WLAN basics and then move on to describe common wireless problem symptoms and their probable causes. The goal is to help you choose the correct path toward solving the problem you actually have. This is important, since some "fixes" that are applied blindly can often make the actual problem worse!

WLAN Types

The two main types of wireless networks are Infrastructure, which are the most commonly encountered, and ad hoc.

In Infrastructure wireless networks, wireless clients (commonly referred to as Stations or STAs) connect to access points (APs), which coordinate and relay traffic among STAs. Note that in an Infrastructure WLAN, STAs do not directly communicate, which is a common misconception. APs also bridge data traffic between the wireless and wired segments of a LAN.

Note: A wireless router contains an access point (AP), router and switch combined to share a single Internet connection among wired and wireless clients. Wireless routers are normally used in small networks at homes and small businesses that require only a single AP. However, if additional wireless coverage is required, additional APs can be connected to the wireless router.

In this series, I'll usually use the term AP, but this can also mean wireless router.

Figure 1 illustrates the coordination and relaying functions in an Infrastructure WLAN. For a file transfer from Computer A to B, the data packets are transmitted from Computer A to the AP, then retransmitted to Computer B.

Sending and receiving on an infrastructure wireless network

Figure 1: Sending and receiving on an infrastructure wireless network

In ad hoc wireless networks, STAs create a peer-to-peer network without an access point. The communication on a ad hoc network is regulated by protocols that are included in the 802.11 standards and implemented in each STA.

In this series, we'll concentrate on Infrastructure wireless networks since they are the predominant type.

More Basics

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I don't log in to github all that often, but I did just now and saw this:https://github.com/jackyaz/VNCConnectDownloaderYou cooking something special ...
Hey All,So i've done a search here but haven't found a solution.I have an asus RT-AC68U and had Merlin's 380.68.4 firmware on it. I updated to 384.13 ...
I managed to setup a OpenVPN server on my Asus RT-AC1900P router. Then on the same router I added an OpenVPN client (I want everything in the local ne...
I was helping my sister with her wifi. She only has a 15/1mbit connection, and everytime one of her kids uploaded a video to snapchat and such, the co...
Hi I have a RT-AC68U on 384.8_2 firmware. when i try to update to the latest version, the progress bar would go to 100 but the firmware stays the same...

Don't Miss These

  • 1
  • 2
  • 3