Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

NETGEAR today announced the ProSafe 24 Port 10/100 Smart Switch with Four Gigabit Ports and 24 PoE Ports (FS728TP).

The new switch features 24 10/100 ports which each support 802.3af PoE with a total power budget of 195 watts. There are also two combination gigabit copper/SFP slots for optional fiber connectivity and two 10/100/1000 gigabit Ethernet ports. Management methods include a web-based admin interface, NETGEAR's ProSafe Network Management Software or other SNMP-based (SNMP v1, v2 and v3) management software.

Other features include Access Control List (ACL) filtering, 802.1x port authentication, enhanced QoS for prioritization of voice traffic, rate limiting, and IGMP snooping.

The FS728TP is available now at $630 suggested list.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

EDIT: I have removed all references to 32bit and 64bit in this post - I made as assumption regarding the new Entware repo and my router model. Everyth...
I could not decide which section this post fit best in. First I will say after doing quite a bit of reading over the last few weeks I learned I know n...
I am looking for a 8 port POE switch.Came across the Zyxel SF302-08Pp. However, I don't find any reviews on it. Just wondering what to expect.
Hi all,I have Gigabit down and 42 up currently on Docsis 3.1 (implemented) via Comcast. I'm using FreshJRs latest script and Merlins latest firmware o...
I am also have similar issues to what I have seen in some of the posts and have actually had to go back to stock firmware to fix it.My ISP is Cogeco.c...

Don't Miss These

  • 1
  • 2
  • 3