Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

Cisco LogoCisco has updated its powerline networking product line.

The new lineup includes the PLE400 single port and PLS400 four-port adapters, offered in two kits. Both adapters have 10/100 Ethernet ports and support the 200 Mbps HomePlug AV standard.

Cisco Linksys PLSK400 Powerline AV 4-Port Network Adapter Kit

The Linksys PLEK400 Powerline HomePlug AV 1-Port Adapter Kit includes two PLE400 adapters, lists for $99.99 and is available now.

The Linksys PLSK400 Powerline AV 4-Port Network Adapter Kit includes one PLE400 and one PLS400 adapter, lists for $119.99 and is available now.

Also announced was the Linksys PLW400 Powerline AV 1-Port Wireless Extender. This is a single-band 802.11b/g/n access point with built-in HomePlug AV adapter, similar to D-Link's DHP-W306AV [review]. It lists for $119.99 and will be available in March.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Stubby is an application that acts as a local DNS Privacy stub resolver using DNS-over-TLS. Stubby encrypts DNS queries sent from a client machine to ...
HelloI have RT-AC87U Router with latest Merlin firmware and my network have access to address starts from 192.168.10.1 to 192.168.11.254. My IP of rou...
As you already noticed entware-ng (http://pkg.entware.net/binaries/mipsel) doesn't get updated anymore.The repo on github is archived (read-only) and ...
Hi,I have RT-AC86U on latest merlin FW 384.7. At the same time i have 2 x 1Gpbs connection from 2 diff ISPs.I have configured load-balancing ratio of ...
Any ideas on how to get overclocking working on RT-AC68U running 384.7? I am using JFFS scripts to set clkfreq to 1200,666. This is working (verified ...

Don't Miss These

  • 1
  • 2
  • 3