Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

TRENDnet logoTRENDnet has announced three upcoming PoE+ switches that will ship in August.

The three new switches all support the newer 802.3at Power over Ethernet standard that provides a maximum 25.5W per PoE+-enabled port vs. 802.3af's 15.4W.

All three feature all-metal cases, non-blocking switching and GREENnet power saving.

TRENDnet PoE switches

TRENDnet PoE switches

Models and pricing (MSRP) are below. All three ship come August.

TPE-TG44g 8-Port GREENnet Gigabit PoE+ Switch    $149.99
Four Gigabit PoE+ ports; four non PoE+ Gigabit ports

TPE-TG44g features include: four gigabit PoE+ ports; four gigabit (non-PoE) ports; a 16 Gbps switching capacity; a sturdy metal desktop enclosure; and up to 75% GREENnet power savings.

TPE-TG80g 8-Port GREENnet Gigabit PoE+ Switch    $279.99
Eight gigabit PoE+ ports

TPE-T88g 16-Port GREENnet 10/100 Mbps PoE+ Switch    $279.99
Rackmount; Eight Gigabit PoE+ ports; Eight non PoE+ Gigabit ports

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Been running this RT-AC86U for a little over a month now. 1st thing I did was to load Merlin firmware which seems to be running fine. A short while b...
I'm trying to build NoDogSplash on AsusWrt Merlin 384.14. Compile is fine, configuration also ok. But when I start nodogsplash, it complaining that ip...
I just replaced my Asus 1900P running Merlin with a Netgear r7800 running Voxel 1.0.2.72SF. So far it seems to be running well. Was curious if there a...
Hi Guys I'm totally new here, so forgive my ignorance. I've setup an RT-AC5300 at my in-laws home and put the Sky hub into Modem-Only mode (well, disa...
Hi. Noticed a few people in other posts mentioning that they use a higher end router as a node. I was thinking of doing this but not sure if it would ...

Don't Miss These

  • 1
  • 2
  • 3