Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Routing Performance

NOTE!Testing Notes:
All tests were run with LAN endpoint in DMZ

I don't have much to say about the throughput results other than they're damned impressive and make the 8200 the routing throughput champ of all the routers I've tested!

I also ran the UDP streaming tests at 1Mbps and the 8200 didn't even flinch, turning in 1Mbps throughput with 0% lost data.

Routing Performance Test Results

Test Description Transfer Rate (Mbps) Response Time (msec) UDP stream
Throughput (kbps) Lost data (%)
WAN - LAN 63.0 1 (avg)
1 (max)
500 0
LAN - WAN 57.5 1 (avg)
1 (max)
499 0
Firmware Version 2.5.31
See details of how we test.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Asus RT-AC68U, Merlin 384.18:and in the same time:How could it be? Is IGMP snooping enabled or not?
Hi,I running a AC5300 & 384.12. Has anyone else experienced the Ethernet ports dropping from an initial 1Gbps port speed when the cable is first plugg...
This is FlexQoS, a fork of the original, groundbreaking FreshJR_QOS script written by @FreshJR.FlexQoS provides a fully customizable Adaptive QoS expe...
ASUS RT-N56U custom firmwareI thought it would be nice to have a dedicated thread for this firmware.
There was a thread here by another poster. There were some disagreements and that thread was deleted. I found the script by @Martineau on Pastebin, bu...

Don't Miss These

  • 1
  • 2
  • 3