Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

For services that don't work with the router's UPnP, static and triggered port forwarding are available for up to 16 single ports and 16 port ranges (UDP, TCP, or both), respectively. Static forwarding includes the ability to separately set internal and external ports, though this is not configurable with triggered forwarding.

ZSR0104CP's firewall options are fairly basic, and the router does not have the option to block WAN pings. It allows for up to 16 rules allowing or denying Internet access for IP and port ranges (with an option to control access based on time), and can filter up to 16 MAC addresses. The router also supports keyword-based content filtering that applies to all clients, and is not schedulable.

The rear view

The rear view

System events and traffic are logged by the router (without syslog or SNMP trap logging), and the URLs of each of the hosts in the traffic logs are clearly identified. These logs may be cleared, but they may not be saved or emailed, and generated alerts cannot be emailed to an administrator.

The ZSR0104CP also includes a dynamic DNS client feature (limited to only dyndns.org), and is one of the few devices in this roundup that is capable of sending WakeOnLAN commands to hosts on the local network.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello, until now I used in my 5ghz configuration Wireless Auto mode, control channel 36 and 20-40-80 MHz. AX mode and 160 MHz disabled. The speeds wer...
Hello,I have a new dual-band RT-AC86U for only one month and I use it in "router" mode. Before that, I used a one band (2.4GHZ) wireless AP. The route...
Just saw the new .386 firmware in my router. Anyone update yet?
There's a sister thread for this same firmware version on the AC86U, but I thought it might make sense to start a separate thread for the AX92U.I have...
Update 2020/10/22 (9.0.0.4.386.40577)386 rc2-7 - Google Drive drive.google.com This version includes 18 models:ZenWiFi: XT8(RT-AX95Q), XD4(R...

Don't Miss These

  • 1
  • 2
  • 3