Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Performance

Current HomePlug AV2 products fall into two categories: SISO (Single-input single output) and MIMO (multiple input multiple output). SISO products were the first to hit the market and, as you might suspect, have lower prices and lower throughput than their MIMO cousins.

The image below shows Average Downlink throughput and pricing for SISO products (left) and MIMO products (right). Clearly, there's a performance difference between the two as the top performing MIMO products have approximately 90+ Mbps more average throughput than the top performing SISO products.

Downlink performance comparison for HomePlug AV2 SISO & MIMO adapters

Downlink performance comparison for HomePlug AV2 SISO & MIMO adapters

We tested the Monoprice 12288 using our standard powerline test procedure with all results entered into the Powerline Performance Charts. For this comparison, I chose the top four AV2-SISO products with the highest average downlink throughput. The other products included in the comparison are the TP-LINK TL-PA6010Kit, the Linksys PLEK500, and the other Broadcom-based product, the ZyXEL PLA5206KIT.

The Downlink Throughput plot below shows that the Monoprice 12288 had the second best throughput at location A and the third highest at both locations C and E.

Downlink throughput comparison

Downlink throughput comparison

The composite iXChariot downlink plot shows steady throughput at locations C and E. Location A had the highest throughput but with significantly more variation. As expected, throughput decreased at more distant locations.

Downlink thoughput IxChariot composite

Downlink throughput IxChariot composite

Uplink throughput, however, is a different story. The plot below shows that the Monoprice 12288 had the best throughput at location A by a significant margin. Drilling down into the details, it outperformed the second place ZyXEL by ~ 50Mbps. However, it turned in a third place performance at location C and finished last at location E.

Uplink throughput comparison
Uplink throughput comparison

The uplink IxChariot plot shows consistent throughput at all locations with throughput decreasing as distance increased.

Uplink thoughput IxChariot composite

Uplink throughput IxChariot composite

The Monoprice's simultaneous up/downlink IxChariot plot shows very lopsided results with the uplink stream having achieving more than 10 times the average throughput as the downlink stream. While the uplink plot showed a larger variance in the 95% confidence level, its throughput was significantly higher than the downlink, and showed steady throughput.

We noted a similar inbalance between the uplink and downlink simultaneous tests on the other Broadcomm-based ZyXEL PLA5206. By comparison, the TP-LINK TL-PA6010 showed only about a two to one inbalance favoring the downlink pair. Since both Broadcom BCM60333-based products exhibit similar behavior, the problem may be caused by how Broadcom manages powerline spectrum use.

IxChariot simultaneous up/downlink

IxChariot simultaneous up/downlink
Adding another simultaneous stream pair gained slightly more than 55 Mbps for a total throughput of 403 Mbps. Again, in this test, the results were very lopsided in favor of the uplink streams. Each of the uplink streams averaged 190 Mbps, where as the combined throughput of the two downlink streams was only slightly above 23 Mbps. Pair 1 was starved for performance averaging only 2.5 Mbps. As with the single pair simultaneous tests, the Broadcomm-based PLA5206 showed a similar inbalance in favor of the uplink streams.

IxChariot simultaneous up/downlink x2

IxChariot simultaneous up/downlink x2

Performance Tests - Noise

Noise tests were run in Location E. In the plot below, the top, blue line shows the baseline throughput test with no noise introduced. The middle green line shows throughput when noise is introduced throughout the entire test.

When the noise is removed at 30 seconds into the run, the red plot shows that throughput quickly climbs to the levels in the original "no noise" plot. However, the red and green plots run concurrently at the same throughput levels from about 10 seconds up until 30 seconds when the noise is removed. After 30 seconds, it climbs up to join the baseline blue plot. This indicates that the the adapter hasn't adapted to the noise, but only adapts to the absence of noise.

Location E noise test - downlink

Location E noise test - downlink

Closing Thoughts

Using the new simplified classing, the Powerline Ranker places the "1 Gbps" Monoprice 12288 tied with the older "AV600" TP-LINK TL-PA6010Kit for #1 rank. This just shows how little the speed / throughput numbers slapped onto these products reflect their real performance.

The other Broadcom BCM60333-based Zyxel PLA5206KIT earned a #2 ranking. Rounding out AV2-SISO category, the other two products, based on the same Qualcomm chipset as the TP-LINK, tied for #3. The composite image below shows the Ranker Performance summary for the top three products.

Ranker Performance Summary comparison

Ranker Performance Summary comparison

Both #1 ranked SISO powerline adapters have two categories ranked #1. The #2 ranked ZyXEL has two categories ranked number two.

While we've seen some pricing fluctuation at Amazon on these products (our charts update automatically on a regular basis), a few dollars one way or the other isn't going to change your purchasing decision. However, if your budget doesn't allow you to move up the the AV2-MIMO class adapters to get better performance, I'd recommend the other #1 ranked TP-LINK TL-PA6010Kit. I like the TP-LINK better because its simultaneous uplink/downlink tests were more balanced than the Monoprice's very lopsided results.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

This is FlexQoS, a fork of the original, groundbreaking FreshJR_QOS script written by @FreshJR.FlexQoS provides a fully customizable Adaptive QoS expe...
I am using an Asus AC3200 router with V384.13.8 firmware.I have purchased a number of Devolo powerline adapters but am having problems using them.The ...
Asuswrt-Merlin 384.19 is now available for all supported models, except for the RT-AX56U (no up-to-date GPL available for that model).The main changes...
Main goal of this release: additional boost of the router performance as I hope (slight boost ). I succeed to change GCC compiler from the version 9....
So to solve all the problems with installing dnscrypt with entware (or similar) then setting up various scripts to handle dnscrypt-proxy starting up i...

Don't Miss These

  • 1
  • 2
  • 3